It is a router that can make your internet setup simpler and provide a consistent user experience across all of your devices.
It might be intimidating to set up a new router, especially if you lack technical knowledge. Fortunately, even novice users may easily follow the Wavlink AC1200 setup instructions. In this tutorial, we’ll look more closely at how to configure the Wavlink AC1200 so you can quickly connect to the internet.
Before you begin, make sure you have the following items:
Step 1: Unbox Your Wavlink AC1200
Unboxing your Wavlink AC1200 router is the first step towards configuring it. A power adapter, an Ethernet cable, and a quick start manual are all included with the router to get you going. Before moving on to the following step, make sure you have all the required materials.
Step 2: Connect Your Wavlink AC1200
Once you have everything, use an Ethernet wire to join your Wavlink AC1200 router to your modem. You can also wirelessly link the router and modem if you don’t have an Ethernet cable.
Step 3: Access the Router’s Web Interface
The Wavlink AC1200’s web interface must then be accessed in order to configure the router. The IP address of the router must be entered in the address bar of a web browser that is open on your computer or mobile device to accomplish this. Wavlink routers typically have a default IP address of 192.168.10.1.
Step 4: Login to the Web Interface
You’ll be requested to log in to the router’s web interface after entering the router’s IP address. Wavlink routers often have “admin” and “admin” as their default username and password, respectively. However, if you’ve changed the login credentials before, make sure to enter the correct ones.
Step 5: Configure Your Wavlink AC1200 Settings
You can begin tweaking the Wavlink AC1200’s settings once you log in to the web interface. The router’s web interface is simple to use and provides a number of options so you may tailor your network.
Here are some settings you may want to consider configuring:
Step 6: Save Your Wavlink AC1200 Settings
Before leaving the web interface after configuring the router’s settings, remember to save them. This guarantees that your settings will be remembered and used the next time the router is used.
Step 7: Test Your Connection
Test your connection one last time to make sure everything is operating as it should. See if everything loads swiftly and without any issues by trying to view a few websites. Try debugging your router or contacting wavlink customer support if you’re having problems with connection or slow speeds.