WL WN538A8 AC3200 Router Setup

A router is also called by the other name of the artwork. It supports eight well-designed antennas. The LED at the top of routers shows the key information. The WL WN538A8 AC3200 router setup process is so easy. It also protects the safety filter and cools down your router.

Specifications Of WL WN538A8 AC3200 Router Setup

• This Wavlink router works with the 802.11ac/a/n/g/b standards with the main 802.11ac WAVE2 standards.
• The remote access function protects your network when you are far away from your house.
• It was built in the DHCP server with an automatic dynamic IP address distribution.
• At the top of this Wavlink router device, you can see the LEDs. With the help of those LEDs, you can easily see the current network status.
• The installation process of this Wavlink router device is so easy.
• As the 5GHz band consumes 2167 Mbps, on the other hand, the 2.4GHz band consumes 1000Mbps speed.

How To Access Into Wavlink AC3200 Router Login Page

• First, connect your laptop or computer to the Wavlink router network with the help of an ethernet cable.
• After that, go to chrome and enter the wifi.wavlink.com web address or 192.168.10.1 IP address.
• Now, fill in all the relevant information or credentials which are shown on the login page.
• As a result, now you will successfully login into the Wavlink router login page without any trouble.

Hence, with the help of this method, you can easily do the WL WN538A8 AC3200 router setup in very less time or without facing any trouble. In case you are facing any issues in your router device then you will need to observe the lower solution tips to resolve them.

Power-Cycle Your Wavlink AC3200 Router

Due to overheating, the Wavlink router does not work properly. In case your router works 24×7 without taking any rest then you will need this method. Early, for a few seconds, you will need to turn off your router. After that, wait for a short while till the Wavlink AC3200 router cools down. In the end, power on your Wavlink AC3200 router and check if your router device works perfectly. If it does not work appropriately then try other solution tips.

Look At All Network Cables

Most of the time people do not check the cable connections, but this is the main reason behind the extender not working perfectly. We suggest you will need to check all the cable connections. If you see any damaged or old wire then swap it with a new wire. Also, check the cable connected tightly to the right port. As a result, after doing this method your Wavlink AC3200 router works perfectly.

Improve Wavlink AC3200 Firmware

After trying the above-mentioned method, if you fail, then you will need to update the firmware of the Wavlink AC3200 router.

• Initially, attach your Wavlink AC3200 router and computer with the use of an ethernet cable.
• Now, go to wifi.wavlink.com’s official website.
• After that, you will visit the Wavlink AC3200 router web management page.
• Further, install the latest firmware file on your computer. (To update the firmware of the router).
• Lastly, restart your computer to complete this upgrade process.

Check Every Ethernet Port

At the back side of the modem, you can find an ethernet cable that was joined to the modem ethernet port. Next, settle a cable in an orange ethernet port of the modem and a yellow ethernet port of the Wavlink AC3200 router. See both ethernet ports in orange and yellow. Ethernet cables also help to transfer data very easily.

Reset Your Wavlink Router

Consider these steps.

• First, find the reset hole button. (Which is mainly located at the back side of the router).
• Press that reset hole button with a paperclip. (For 8 to 10 seconds)
• As a result, your Wavlink AC3200 router will successfully reset.

Note: After resetting the Wavlink router, you will need to do the WL WN538A8 AC3200 Router Setup again.
Tip: If you want to extend the range of the router, follow these tips.

Locate Wavlink AC3200 Router In Half-Way Location

Closer to the exterior walls, if your router is placed then you will not get the signal in all directions. To solve this issue we suggest you locate your wavlink router in the halfway location of your house. By doing this method you will get the WiFi signal of your Wavlink AC3200 router in all directions of your office and house.

With the help of this page, you will learn a lot of things about the WL WN538A8 AC3200 router setup. After trying the above solutions, if the issue is not solved then you will need to contact our team experts by sending mail or by dialing the phone number.