wifi wavlink

WL WN518W2 N300 Extender Setup

Live Chat

Live Chat With Experts and Get Real-Time Responses.

Let’s Talk

Don’t Wait, Then You Can Call Us Right Away.

By doing the WL WN518W2 N300 extender setup you will get the signal in all directions of houses and offices. You can easily do the installation process in fewer minutes. If you want to know how you can use this Wavlink extender device then follow the lower steps carefully.

Specification Of WL WN518W2 Extender Gadget

  • This wavlink extender works with the IEEE 802.11 a/bg/n standards.
  • It consumes the highest wireless speed of the internet.
  • WL WN518W2 N300 extender setup provides 10/100Mbps auto-negotiation to the Ethernet WAN/LAN ports.
  • It has one-touch WiFi security encryption with the WiFi-protected system button.
  • It is supported by the PPPoE, dynamic and static IP addresses, and WISP access to the internet.
WL WN518W2 Extender

Benefits Of WL WN518W2 Extender

  • It has high-gain external antennas to provide the WiFi signals in all directions of the house and office.
  • Moreover, there is a superior chip for a stable experience.
  • The installation process of this extender with the router is so easy.

Login Process Of WL WN518W2 N300 Extender Setup

  • First, connect your computer to the WL WN518W2 N300 extender network with the help of an ethernet cable.
  • Now, open a web browser and enter the web address wifi.wavlink.com web address in the location field.
  • Next, the Wavlink extender login page will open up on your display.
  • After that, fill in all the credentials which are shown on the display.
  • As a result, you will now successfully login into the Wavlink extender.

Do WL WN518W2 N300 Extender Setup By Web UI

  • After doing the Wavlink extender login process, go to the configuration page immediately.
  • Enter several details and on the next page of navigation do some basic things.
  • Make sure you must follow the display steps one by one.
  • Now, select the network that you want to extend.
  • Further, enter the required credentials such as username and security password.
  • You will easily get the Wavlink extender security password from the manual guide.
  • Mainly, it will be admin. So, enter this in the required field and hit enter.

With the help of this web UI method, your WL WN518W2 N300 extender setup process is complete. If not, then try another method.

Do WL WN518W2 N300 Extender Setup By WPS Method

WL WN518W2 Extender wps setup
  • Initially, attach the Wavlink extender to a power outlet.
  • Now, attach your Wavlink extender to that gadget that was provided by the internet service provider.
  • Once the internet provider gadget WPS button is enabled then within two minutes push the WPS button of the Wavlink extender.
  • As soon as the signal LED starts flashing solid blue.
  • Hence, it means the WPS connection method is successfully done.

After trying the above two mentioned methods you will successfully do the WL WN518W2 N300 extender setup process is now completely done.

Working Issues With The Wavlink Extender


You can face numerous working issues with the WL WN518W2 N300 extender setup. These are several problems that you may face while configuring your Wavlink WiFi repeater.

  • Having no internet connection on laptop or on computer.
  • The security password does not work perfectly.
  • The web address wifi.wavlink.com is also not working properly.
  • You may get the WiFi signal but can’t connect to it.
  • The gadget does not detect the WiFi signal automatically.

Troubleshoot All These Issues

  • Verify the WiFi connection
  • Inspect the Wavlink extender settings.
  • See the WL WN518W2 extender settings.
  • Verify the firewall settings of the Wavlink extender.
  • Look at the router DHCP settings.

Note: After trying these tips if the Wavlink extender issue is not solved then try the lower additional tips.

Upgrade WL WN518W2 Extender Firmware

  • First, visit the WL WN518W2 extender web management page.
  • Now, find an administration option and then look at the firmware upgrade option.
  • Further, wait for a while to download the latest firmware file on your laptop and computer.
  • In the end, restart your Wavlink extender to complete this upgrade.

Reset Wavlink Extender


Press the reset hole button of the Wavlink extender with a paperclip for 8 to 10 seconds. All the LEDs of the Wavlink extender will turn off. As a result, the reset process of the WL WN518W2 extender is done.

Note: After the reset process of the Wavlink router you will need to do the WL WN518W2 N300 extender setup process again.

After the study of this full page, now you will be able to do the Wavlink extender login and setup process. In case after trying the above troubleshooting tips if the extender issue is not solved then you will need to contact our technical team experts by sending an email to care@wifiwavlink.net and by phone number 716-992-6371.

Some Issues You Might Face

If you are facing any issues then please contact us, and we will be happy to help you.

Wavlink Customer Service