Wavlink AX1800 Setup
Mail Us
Write to our experts and they will get to you in the least possible time.
The Wavlink AX1800 setup is an easy-to-use device that allows you to get a strong internet signal even at the WiFi dead spots. Basically, it acts as a repeater to expand and widen the existing router’s range. Though you can install this device by yourself, after knowing the crucial information about the configuration process.
Wavlink AX1800 Product Features And Overview
This Wavlink device works by supporting new WiFi standard 802.11AX and 2.4 GHz and 5 GHz bands simultaneously. Where these bands provide the highest internet speed up to 1800 Mbps. Moreover, the inbuilt MU-MIMO technology allows users to connect multiple devices to it.
While talking about its overview, it has two Gigabit Ethernet ports for the wired connections. Additionally, there is a built-in smart indicator that detects and represents the signal’s strength. Lastly, there is a WPS button for configuration and a reset button to factory reset the extender.

Configure Wavlink AX1800 Setup Through WPS
This installation process does not require any web or IP address and login credentials, which is why it is the comfy method. To do this, use the wavlink extender and your router’s WPS buttons.
Thus, connect your device to the network and enjoy seamless internet speed.
Visit The Web-Based Setup Page
In case your existing router doesn’t have any WPS button or you want to configure it in another way. Then, access the extender’s web-based setup page to do this.
Tip: If you are using a PC or laptop, then prefer to make a wired connection instead of the wireless one. As a result, there will be a strong internet signal and connection.
Troubleshoot The Wavlink Setup Errors

After configuring the Wavlink AX1800 Setup device, you may get some errors in its working. To eliminate them, utilize these tips according to the type of error.
Reset The Wavlink AX1800 Setup
After following those tips, reset the extender if it is malfunctioning continuously. To do this, disconnect your devices from it and locate the reset button on the extender. Next, press that button until the LED starts blinking. Now, let the device perform its factory reset process. After resetting the wavlink device, configure it again through any installation process.
We hope that through using these installing and troubleshooting tips, you will be able to use your wavlink AX1800 setup properly. In case, you have any queries about the procedure, then reach our team to get the solutions.
Wavlink AX1800 Setup FAQs
The default web address of the wavlink is wifi.wavlink.com and the IP address is 192.168.10.1. The login information is admin for the username and password.
While configuring it, you must place and fix it near the existing router. But, after the configuration process, you can relocate it halfway between the router and the connected device. If you are using this device at your house, then the ideal location for this device is at the center of the house.
For a wireless connection, select the extender’s network from the WiFi network list on your device. Fill in the network’s password and click enter. In the case of a wired connection, use an ethernet wire and insert the wire ends into the extender and your device’s ethernet ports.
You can visit the web-based setup page to do changes. Access the login page on your device’s web browser and log in there. Afterward, go to the advanced settings and do the modifications which you want. In the end, click the Save option to apply those changes.