WL WN531A3 AC1200 Router Setup

The WL WN531A3 AC1200 router setup process is so easy and simple. You can easily connect with a modem and extender. If you want to know the information about this Wavlink router device then you will need to read this full page. Let’s dive into the process.

Features Of WL WN531A3 AC1200 Router

• WN531A3 router works with the IEEE802.11a/b/g/n/ac standards.
• It supports dual-frequency bands 2.4GHz and 5GHz.
• Simultaneously, the 5GHz band consists of 867Mbps and the 2.4GHz band consists of 300Mbps.
• With the help of the USB port, you can easily share media and files with networked devices.
• By touching the WPS button you can easily connect your router and extender with each other.

How To Visit Wavlink Router Web Management Page

• First, with an ethernet cable connect your Wavlink AC1200 router model to the computer.
• After that, you will need to write the web address wifi.wavlink.com in the search bar.
• Now, enter all the credentials or details which are shown on the display page.
• Thus, you will successfully do the Wavlink router login process.

By Ethernet Cable- Do WL WN531A3 Router Setup

• First, join the end of the cable into an electrical outlet.
• After that, join the other end of the ethernet cable to the modem.
• Now, place your modem into the power cord of the wall socket.
• Next, at the back of the modem connect one ethernet cable and join another end of the cable to the router ethernet port.
• As of now, place your router power plug-in electrical plug.
• After doing all the above steps, a solid green LED starts blinking on both the extender and router gadgets.

By Web Portal- Do WL WN531A3 Router Setup

• After visiting the web management page of the Wavlink router, you will need to go to the installation page immediately.
• Now, on the other page of the navigation, you will need to do some basic things.
• Also, step by step considers the on-screen instructions.
• After that, pick that network from the WiFi list which one you want to extend.
• Enter the username and security password in the required blanks.
• Further doing all the steps one by one, the WL WN531A3 router setup process is completely done.
• Verify all the settings of the Wavlink AC1200 router.
• Do not locate your router near metal appliances.

If the above tips don’t help to fix issues then you will need to follow the lower solution ways to fix router issues.

Upgrade Wavlink Router Firmware

• First, open chrome on your computer and enter the web address in the URL bar.
• Now, the Wavlink router web management page will open up on your display.
• After that, tap administration and then hit on the update software option.
• Next, wait for a few minutes till the latest firmware file downloads successfully.
• In the end, restart your Wavlink router to finish this upgrade process.

Reset Wavlink AC1200 Router

• First, take a paperclip or hairpin.
• Now, insert that paperclip in the router reset hole button.
• After that, all the router LEDs will turn off.
• As a result, it means your Wavlink router device is completely reset.

After completing the reset method, you will need to do the WL WN531A3 AC1200 router setup process again

Note: If you want to extend the range of the router’s WiFi signal then you will need to do the configuration process of the router with an extender.

Do WL WN531A3 AC1200 Router Setup With An Extender

• First, place the power plug of the extender and router in the power socket. Make sure they both must be located closer to each other.
• Now, you will need to press the WPS button on the extender and router.
• The solid blue LED starts flashing on both the extender and router gadget.
• Hence, it means the configuration process of the Wavlink router with an extender is done.
• Check the gap between the Wavlink router and extender.
• Doesn’t place the router and extender closer to electronic gadgets.
• You will need to upgrade the software of your extender device.
• Reset your extender device.

With the assistance of this full page, you will be able to do the WL WN531A3 AC1200 router setup process. In case you have any questions or queries in your mind then discuss them with our team experts by delivering mail to care@wifiwavlink.net or by phone number 716-992-6371.