WL WN576G3 AC1200 Extender Setup

The installation process of the WL WN576G3 AC1200 extender setup is not as daunting a task as it seems to the first-time user. Its WPS feature allows users to configure it easily while providing some attractive benefits. To make the process more simple or use this device efficiently, read and utilize these instructed directions.

WPS Method For Extender Configuration

To perform the WL WN576G3 AC1200 extender setup process conveniently, use its WPS function.

• Fix the extender to the power source with keeping in mind the range limit.
• Make sure the extender is close to the router to create a strong signal.
• Initially, push the extender’s WPS button for a few seconds.
• Wait till the extender does its boot up and turns into a findable state.
• After that, press the router’s WPS button and let it connect to the extender.
• Leave both devices for some time and keep an eye on their LEDs.
• In some time, the extender and router will be connected successfully.
• Now, take the next step which is connecting your device to the network.

WL WN576G3 AC1200 Manual Setup Method

In addition to the WPS process, there is another way which is a web-based setup manual method through which you can configure the extender.

• To begin with, connect the extender, router, and device to make a network.
• Connect the device to the extender network for a wireless connection.
• Whereas using an ethernet wire to make a wired connection.
• Insert the wire ends into the extender and router or device’s ethernet ports.
• Following this, open any updated web browser on that device.
• Type the extender’s default web or IP address in the browser’s search bar.
• The web address of the extender is wifi.wavlink.com and 192.168.10.1 is the IP.
• Then, the web browser will redirect you to the extender’s login page.
• Use the extender login credentials to sign in to the setup portal.
• Here, the login credentials will be an admin for both username and password.
• As you click the Sign-In option, the setup page will appear on the screen.
• After that, choose the network from the settings or you can create a new strong SSID there.

Thus, the WL WN576G3 AC1200 extender setup is configured now through a web-based method.

Resolving Tips For WL WN576G3 AC1200 Extender Setup Errors

In any case, if the extender shows some errors while extending the signals, apply these solutions to eliminate them.

Restart The Extender

In this method, unplug the extender and the router from the power sockets and take them some rest. Verify whether these are overheating or not. As sometimes continuous usage creates overheating in devices. After some time, fix them again and also connect your devices to the network. Finally, check the extender’s working as it will start performing well now.

Update The Software

Sometimes the outdated version of the firmware creates errors in the extender working. To update the software, check the current and the latest firmware version of the extender on the PC. Further, download the official file of the extender and save that on your PC. Again, visit the web-based setup page and upload the file there. Lastly, complete the firmware update option.

Reset WL WN576G3 AC1200

Another foolproof solution to discard the issues is to reset the extender. Locate and press the extender’s reset button. Use a paperclip if required to press that button. The LED on the extender will start blinking now and will become stable after some time. Once it becomes constant, reconfigure the extender again as this process will discard the configured settings.

Make Network Secure

While configuring the extender this time by choosing any method from both processes, create a strong password for the network. Also, make a different or unique SSID this time. More than that, do some changes in the extender’s advanced setting for better performance. However, click the Save option to apply and implement the extender changes.

We expect that after implementing these troubleshooting tips, the WL WN576G3 AC1200 extender setup will start working efficiently now. If it is not, then don’t think twice to get in touch with us. Simply call our experts at 716-992-6371 or mail at support@wifiwavlink.net. They will be happy to assist you!