Who doesn’t like to enjoy faster speeds and consistent internet connection throughout? If you are also fed up with lags and bufferings while watching or streaming your favorite shows, dropped signals while working from home or a complete dead zone in certain areas like the basement, terrace or any outdoor area then worry not we have a perfect solution for you. It is none other than a Wi-Fi range extender also known as a Wi-Fi repeater or Wi-Fi booster. Macard has come up with the best amongst the best extenders that will blow your mind with its ultra-fast speeds and reliable networking. Now you do not need to worry about the number of devices that are connected to your network, as Macard extenders can handle it all efficiently and smoothly. So without wasting any more time let’s learn the Macard Extender Setup process:
The Macard Extender Setup process is very simple, easy, and straightforward. Here’s how you can do it:
- Begin by plugging the extender into a power outlet and push the on button upward to get the device started. You should see the LED lights on the extender indicating that it’s powered up and ready for the next step.
Note: The power button is located on the left side of the extender. Before proceeding with the next step make sure to turn off the mobile data.
- Now take any device of your choice like a phone, tablet, computer, or laptop, and go to its Wi-Fi settings. In the list of available networks look for the network name “Wifi Extender”. Connect to this network to establish a connection between your device and the extender.
- To access the setup page open a web browser like Safari, Chrome, or Mozilla Firefox and type in the default IP address of the extender. The default IP address is http://192.168.10.1 or http://go.macard.online. This will take you to the extender’s setup page where you can configure different settings.
- Now, choose the network name that you want to extend and enter the password of your existing WiFi network. Click on the “ Save Settings” button. Wait for 30 seconds as the extender will reboot itself.
- Once the Macard Extender Setup is complete, it’s time to test the connection. Connect your device to the extender’s network and check if you have a strong and stable Wi-Fi signal. For the same, go to different areas of your home and start streaming movies or perform heavy data-requiring tasks to check whether there is smooth connectivity in every corner of your place or not.
That’s the detailed breakdown of the Macard Extender setup process. But if you still aren’t able to get through it feel free to contact the Macard Customer Support team for smooth installation.
Changes You’ll Notice After The Successful Installation
- Once you connect your device to the extended network you’ll get consistent and fast internet speed throughout your home.
- You’ll notice there is internet coverage in each and every corner where earlier there was a dead zone.
- There will be no signal drop-off even if you are sitting in the outside area of your home.
- No matter how many devices are connected to the network, every device will get equal and consistent speed.
- You can also set up device prioritization in case you need urgent and full attention to a significant device. Isn’t it amazing!
So don’t wait further just grab one for your place and get amazing internet speeds throughout your place.
