wifi wavlink

WL WN530A3 AC1200 Router Setup

Live Chat

Live Chat With Experts and Get Real-Time Responses.

Let’s Talk

Don’t Wait, Then You Can Call Us Right Away.

WL WN530A3 AC1200 router is a dual-band router or smart WiFi router. The WL WN530A3 AC1200 router setup process is so easy. Read this full page to get the proper knowledge of this Wavlink AC1200 router device. Let’s jump into the process.

Specification Of Wavlink AC1200 Smart WiFi Router

  • You can easily fit it anywhere in your home or in the office.
  • It comes with an elegant texture.
  • After doing the WL WN530A3 AC1200 router setup you will enjoy more channels and entertainment.
  • With its unique antennas designed, you can easily locate it on your desk.
  • It comes with 4x5dBi high-performance antennas.
  • For getting optimal performance, the WL WN530A3 router comes with a dual processor.
  • Very easy to visit the web management page and simple to use.
  • It supports the dual frequency bands 2.4GHz and 5GHz bands.
WL WN530A3 AC1200 router setup

Common Instructions For Wavlink AC1200 Router Setup

  • To begin with, you will need to connect the LAN cable from the modem to the router’s ethernet port.
  • Now, by using an ethernet cable connect the LAN port of the router to the computer.
  • After that, place the power plug of the computer, modem, and router in a wall socket.
  • Next, you will need to turn on all your gadgets and wait for a few minutes to see the solid green LED on both the extender and router gadget.
  • As a result, after doing this method, your WL WN530A3 AC1200 router setup process is completely done with the modem.

By Web Portal- Do WL WN530A3 AC1200 Router Setup

  • After doing the Wavlink router login process, go to the configuration page immediately.
  • Now, on the next page of the web browser do some common things.
  • Next, also make use of the display instructions which are shown on the page.
  • Further, select the network that you want to extend.
  • Thereafter, enter the login credentials such as username and security password.
  • From the manual guide, you can get the security password.

How To Login Into Wavlink AC1200 Router

  • First, you will be required to configure the IP protocol on your gadget so that you will easily obtain an IP address automatically.
  • After that, connect your WiFi gadget to the Wavlink router network.
  • Now, open a web browser on a Wi-Fi-containing gadget.
  • Next, enter wifi.wavlink.com in the URL bar.
  • Thereafter, the web management page of the Wavlink router will be opened up on your display.
  • Fill in all the credentials which are shown on the page.
  • Hence, you will successfully visit the login page of the Wavlink router.

By WPS Method- Configure Wavlink AC1200 Router

WN530A3 AC1200 wps setup
  • First, put the power plug of the Wavlink router into the power source.
  • After that, sync the Wavlink router to your house network.
  • Now, you will need to connect the router to the internet service provider gadget.
  • Next, you will need to push the WPS button of the ISP device, and inside in two minutes push the Wavlink router WPS button.
  • As soon as, the solid blue LED starts blinking on both gadgets.
  • Therefore, it means your Wavlink AC1200 dual-band router is successfully linked with each other.

Why New Wavlink AC1200 Router Does Not Work Perfectly

  • On the computer and laptop, there is no internet connection.
  • Also, the web address wifi.wavlink.com does not work properly.
  • Due to entering the wrong security password.
  • The gadget does not detect the router’s IP address automatically.
  • See the WiFi signal, but unable to connect to it.

Resolve All These Wavlink Router Issues

  • First, verify the WiFi connection.
  • See all the Wavlink router settings.
  • Upgrade the software of the Wavlink AC1200 dual-band router.
  • Also, check the Wavlink AC1200 router firewall settings.
  • Verify the router dynamic host configuration protocol settings.

Reset Wavlink AC1200 Dual-Band Router

  • At the back side of the Wavlink router device, you can get the reset hole button.
  • Now, push that reset hole button for 8 to 10 seconds with the help of a hairpin.
  • After doing this, all the Wavlink router LEDs will turn off.
  • As a result, your Wavlink AC1200 router device will completely reset.

Note: After the reset, you will need to do the WL WN530A3 router setup process again.

After reading this page, you will get full knowledge about the WL WN530A3 router device. In case you are unable to fix the Wavlink AC1200 router setup issues, after trying out the above troubleshooting tips then don’t panic. Just try to reach our team experts by delivering an email at care@wifiwavlink.net or by calling on this phone number 716-992-6371.

Some Issues You Might Face

If you are facing any issues then please contact us, and we will be happy to help you.

Wavlink Customer Service