wifi wavlink

WL WN580N2 N300 Extender Setup

Live Chat

Live Chat With Experts and Get Real-Time Responses.

Let’s Talk

Don’t Wait, Then You Can Call Us Right Away.

By performing the WL WN580N2 N300 extender setup process you will easily extend the range of any existing router WiFi signal. On this page, you will get full knowledge about this Wavlink extender product. So read this page and follow the instructions carefully.

Benefits Of WL WN580N2 N300 Extender Setup

  • It doubles the coverage of the router’s WiFi signals.
  • You can connect any device with its USB port.
  • It works under WPA-PSK/WPA2-PSK encryption.
  • You can easily connect with any router by pushing the WPS button.
  • At one time many devices can be connected to this network.
  • It is mainly designed for tablets, smartphones, and other portable electronic gadgets.
  • This Wavlink N300 extender comes small in size and is very easy to carry.
  • It is also called the name of a USB WiFi extender.
  • After installation, no more WiFi dead zones will leave.
WL WN580N2 N300 Extender Setup

How To Login Into Wavlink Extender

  • First, open a safari web browser and enter the web address wifi.wavlink.com or an IP address in the location field.
  • Now, fill in the relevant details to visit the Wavlink extender login page. Details such as username and password.
  • After that, you will successfully visit the Wavlink extender login page.

Do WL WN580N2 N300 Extender Setup

  • Initially, place the Wavlink extender USB port into the laptop USB port.
  • Make sure your Laptop device to which your extender is connected must be near the host router.
  • Now, push the WiFi Protected system button of the extender.
  • Further, in two minutes press the main router WPS button.
  • Next, a solid blue LED will appear on both gadgets.

Hence, it means the WL WN580N2 N300 setup process is completely done. In case you are facing trouble then follow the lower solution tips to fix them.

Fix WL WN580N2 N300 Extender Issues

You can easily fix the Wavlink extender issue with the help of a lower variety of solution tips.

Tip 1: See All Wired Connections Who Connects With N300 Extender

Verify all the wired connections which join your wavlink extender. In case you see any damaged wire then replace it immediately with a new wire. After changing the wires, see your computer or laptop. On your laptop or on a computer if you see an internet connection then you can be relaxed and not working issue of the WL WN580N2 extender issue is now resolved.

Tip 2: Verify The Placement Of An Extender

The best placement for your wavlink WiFi extender is the halfway location of your house and office. Ensure that your wavlink WiFi extender must be within the router range. The range between both devices should not be more than 10 to 15 feet away, otherwise, you can still face issues with your Wavlink extender device.

Tip 3: Eliminate Additional Device

Most of the time, the wavlink extender is not working correctly due to many WiFi devices linking with your Wavlink extender network. So we recommend that you remove the extra devices which are not in use.

Tip 4: Update Wavlink N300 Extender Firmware

Upgradation of software will help you to troubleshoot the extender not working issue. If you don’t know how to update the software of the wavlink extender then follow these steps.

  • First, launch a web browser on your mobile phone and enter wifi.wavlink.com in the search box.
  • Now, the wavlink WiFi N300 extender login page opens on your display and enters all the required credentials which are needed on the screen.
  • Further to do this, you will visit the Wavlink extender settings. Now, click on the administration option
  • Below the administration option, select the software update option and tap on wavlink extender software updates.

After trying all these tips if you are still facing an issue then try this last method.

Tip 5: Reset Wavlink Extender

  • First, find the reset hole button. (which is mainly located at the back side of an extender).
  • Press that button with the help of a paperclip for a few seconds.
  • Now, all the LEDs of the Wavlink extender device will turn off.
  • After doing this, your Wavlink N300 extender device completely reset.

Note: After the reset of the wavlink WiFi extender you will need to do the WL WN580N2 N300 extender setup process again.

We hope you will now be happy after reading this post because you will be able to know the proper details about the login and setup process of the WL WN580N2 N300 extender device. As if you are trying the above troubleshooting tips but do not get the solution to your Wavlink extender issue.

Some Issues You Might Face

If you are facing any issues then please contact us, and we will be happy to help you.

Wavlink Customer Service