Live Chat with our experts & get real-time answers to all your queries.
Write to our experts and they will get to you in the least possible time.
Although to configure the Wavlink router, extender, or powerline, you can mainly use two-three methods. The former is through the WPS button and the latter is by visiting the web-based setup page. Obviously, the 192.168.10.1 setup comes under the second method. In order to visit the web-based configuration page of the wavlink device, you will need to search for this IP address in any web browser. So, to use this thing appropriately, follow these directions.
What Does The IP Address Mean?
The IP is the Internet Protocol address which is a unique number of a PC or other network-connected device. In simple words, it works to communicate among computers and other devices. Each device has its own different IP address whether it is a PC and router or extender. Clearly, in the configuration process of the extender and router, there will be a requirement to use the default IP address.
Wavlink Device Login Via 192.168.10.1 Setup
You can use this IP address to access the wavlink’s login page on any web browser. To execute this process, utilize these instructions.
Manual Method To Access The Login Page
In addition to that method, you can choose the manual way to visit the login page. Use your PC or laptop and an ethernet cable for this process. Make sure the ethernet cable is working well.
Resolving Tips For 192.168.10.1 Errors
In any case, if you experience an error while using the 192.168.10.1 setup to log in, use these troubleshooting tips. But, before moving to the resolving points, look for the reasons behind this.
Not A Good Connection
There can be a probability that the connection you have made is weak or interrupted. Your device may be connected to the wrong wireless network or the ethernet wire is broken. This is why you are getting errors in the login process.
Inaccurate IP Address
Besides that, you might use or type the wrong IP address in the browser’s search panel. As each device has its own unique IP address and even one single wrong digit in this address can cause errors.
Disrupted Router’s Working
Last but not least, your existing router may not be functioning well or have some interruptions while providing signals. This can be a reason that the web browser is not able to access the login page.
After verifying those above-mentioned steps, take the appropriate solutions and steps to get the error fixed.
Unplug The Router/Extender
Undoubtedly, this is the first and easiest method to remove the 192.168.10.1 setup errors. To do this, unplug the Wavlink gadget and disconnect your devices too. Leave these devices unplugged for some time and plug them in again. Later, Connect your device to it and try to visit the login page.
Use The Correct IP Address
While inserting the IP address in the browser’s search bar, double-check it once so that there will be no mistakes. In fact, try to copy and paste this IP address into the search panel.
Reset The Router Or Extender
Apart from that, choose the device’s reset function to bring it to its default settings. Press and hold that button for a few seconds and let the device perform its reset process. After resetting it, connect the device to it and use the 192.168.10.1 setup for logging in.
Therefore, you will get success to perform the 192.168.10.1 setup process conveniently. However, if you face any error during the procedure, you can contact us to get help. To do this, simply call us at +1 408-477-8750 or mail us at Care@wifiwavlink.net. We will surely assist you as quickly as possible.
FAQs On 192.168.10.1 Setup
Search 192.168.10.1 in the browser’s search panel and go to the Advanced settings on the next page. Do the changes that you want and click the Save option to save them.
You can access the login page by searching the device’s default IP address in the search bar. Fill in the IP address and click enter. On the next screen page, enter admin as the username and the password in the required field and click Login.
First, go to the wavlink’s default web-based setup page and then wireless settings. Then, select the Password option under Security and choose the protocol for which you want to change the password. Thereafter, create a new password and click on the Save option.