WL WN535N2 N300 Router Setup

By doing the WL WN535N2 N300 router setup you will easily enhance the WiFi signal coverage. It has so many of the latest technology functions. To enjoy the features of this Wavlink N300 router device you will need to read this full article carefully.

Specifications Of WL WN535N2 N300 Router Device

• The N300 router complies with the IEEE 802.11n standards.
• It consists of wireless speeds up to 300Mbps.
• In this router, you will get the one-touched wireless security encryption with the WPS button.

How To Access Into WL WN535N2 N300 Router Login Page

• First, connect your mobile phone and laptop to the Wavlink router network.
• Now, open a web browser and fill in the web address wifi.wavlink.com.
• Now, enter all the basic credentials of the Wavlink N300 router.
• After that, you will successfully login into your router and easily change any settings of your N300 router device.

Do WL WN535N2 N300 Router Setup By WPS Method

• Initially, place the router, extender, and your gadget in the same place.
• Now, into the power outlets plug your host router and extender.
• Next, press your extender WPS button.
• Now, push the router’s WPS button for a few seconds till the LED starts blinking.
• Within the next few minutes, push the existing extender’s WPS button and let both devices connect together.
• After some time, check the LEDs on both devices as those will turn solid soon.
• Once the connection becomes successful, use the router’s touch link button to connect your device to it.
• Further, softly press the router’s touch link button and tap the device head on that button.
• Next, let your device access and connect to the router network.
• There will be no need to fill in the router password in the field.

Note: After the WL WN535N2 N300 Router Setup if your router does not work properly, follow the lower troubleshooting tips.

Turn ON/OFF Your Wavlink Router

The primary reason for the Wavlink router’s red light is overheating if your router works 24×7 without any rest. First, you will need to power off your router for a few minutes. Now, wait till the Wavlink router begins cooling down. Finally, power on your router and see if your Wavlink router works properly without any red flashing light.

Verify All Cable Connection

Most people do not check the wires, but this is also a major reason behind the red light issue of the Wavlink router. When this red light issue starts, it can damage all cable connections. Then, you will also be required to check all the wires and replace the old or damaged wire with a new one. In addition, verify that the cable connects tightly to the correct port. For new cables that are changed with damaged wires, make sure that the new wires should be of the best quality.

Upgrade Wavlink Router Firmware

If you fail after trying out the above method then try out this other tip to solve the red light issue. Consider these steps to do this method.

• First, connect your router and computer together by the use of an ethernet cable.
• Now, go to the official website of Wavlink router wifi.wavlink.com.
• After that, you will enter the web management page of the Wavlink router.
• Further, download the firmware. (To update the firmware of the router).
• Lastly, restart your computer to complete this upgrade.

Reset Your Wavlink Router

Consider these steps.

• First, find the reset hole button. (Which is mainly located at the back side of the router).
• Press that reset hole button with a paperclip. (For 8 to 10 seconds)
• As a result, your Wavlink router will successfully reset.

Note: After the reset of the Wavlink router, you will need to do the setup of the router again.

After the study of this page, if you are facing any issue with your Wavlink N300 router device then you will need to reach out to our Wavlink technical team by sending a mail to support@wifiwavlink.net or by dialling a phone number 716-992-6371