WN570HA1 AC600 Outdoor AP Setup

The WN570HA1 AC600 Outdoor AP Setup is built to fulfill the optimized internet speed requirement of small businesses and houses. Through its dual-frequency bands, this device is capable of providing an internet speed of up to 600 Mbps to every corner of the place. Although it can be connected and configured easily, you will require some basic information to do this. So, use these directions precisely.

AC600 Outdoor AP Technical Specifications

This useful device comes with a flexible configuration process, which means there is no need to use any specific tool. After configuring this, there will be three different modes available, such as the AP, repeater, and router mode. Clearly, you can choose any one of these accordingly.

More than that, the POE in this device allows users to do the installation where the power outlets are not available easily. The inbuilt high-power antennas of this outdoor product make the signal reception and keep the devices’ attached processes smooth.

Unbox WN570HA1 AC600 Outdoor AP Setup

When you do unboxing of the outdoor device, you will get the device itself and its antennas, networking, and power cable. In addition, the packaged box will contain the POE converter, main body holder, and one quick installation guide. That setup guide will provide you with brief information about this product, from setting up this device to configuring it easily.

AC600 Outdoor Smart App Setup

To configure this device with ease choose the Wavlink smart app setup method. Use your device and the setup points from here.

• After getting the WN570HA1 AC600 Outdoor AP Setup from the packed box, join its parts together.
• Attach the POE and the power cables to it and then plug the power adapter into the power socket.
• Once the outdoor network starts appearing in the device’s wireless list, make a connection between them.
• Fill in the network password in the field and tap the connect option.
• Later, open the Google Play Store and type Wavlink App in the search panel.
• Install the official app and tick mark the terms and conditions points on the app page.
• After doing this, do the login to the outdoor and choose the location and time zone as well.
• Lastly, execute the setup process and use the app screen instructions to do this.

Web Browser Setup Process

Alternatively, you can use any updated web browser to perform the setup process. In order to do this, attach the device to the outdoor network and open the web browser on it. Type wifi.wavlink.com or 192.168.10.1 in the browser’s search field to visit the setup portal. Further, do login on to the next page and complete the setup procedure carefully.

Reset The Outdoor AP

To get back the outdoor to its working state by removing its errors, choose its reset function.

• In order to do this, disconnect your networked devices from the outdoor AP.
• But, let it connect to the power outlet to proceed with the reset process.
• Next, find the reset button from the outdoor panel and press it till the outdoor starts the process.
• Now, let the WN570HA1 AC600 Outdoor AP Setup complete the reset procedure.
• After completing the process, configure the outdoor AP again by visiting the web-based setup page and using the smart app.
• In the end, attach your device to the outdoor network and verify whether it is working now or not.

As you apply all these useful points to the WN570HA1 AC600 Outdoor AP Setup, your devices will start getting stable signals. If these are not getting, then contact our experts to get that. Don’t waste your time anymore with the product, instead, take solutions from us by mailing support@wifiwavlink.net or calling 716-992-6371.