How To Reset Wavlink AC1200

Wavlink AC1200 Reset Methods

Generally, there are two different ways that you can try out to reset wavlink ac1200 device. The former is on the web-based management portal and the latter is by using its reset button. Go through both processes separately and use the method accordingly.

Wavlink AC1200 Factory Reset

The first and easiest method is the soft reset process, in which you will need to access the default setup page. Let the Wavlink gadget and the networked device be connected to execute the process.

• Open any web browser on your networked device and access the setup portal.
• To do this, search for the Wavlink web or IP address and the browser will redirect you to the setup page.
• Then, fill in the login details such as the username and password in the boxes.
• After clicking on the login button, go to the management interface of the device.
• Thereafter, click on the Backup/Restore option from the next page of the screen.
• There you will see an option for Factory Default, which will allow you to reset Wavlink ac1200.

Wavlink AC1200 Hard Reset

Aside from the above-mentioned approach, the hard reset process involves pressing the reset button of the device. Take your Wavlink device and a paperclip if required and do the reset process afterward.

• Unlike soft reset, discard the devices that are networked to the network.
• Make sure to let the Wavlink AC1200 device power on for the further process.
• Locate the reset hole button on the device and use a paper clip for this.
• Insert the paper clip and press the reset button for a few seconds.
• Wait till the reset process comes to its last point and the LED turns solid.
• Doing so will discard the older installation settings and the errors from its working.
• Lastly, configure the Wavlink AC1200 again by using the web-based setup window or the Wavlink WiFi app.

Configure The AC1200 Again

After doing the reset process, you will require to install it again to make it ready to use. In the first method, access the web-based setup portal and extend the Wavlink network. In the other approach, download the Wavlink app on your device from the App Store and execute the installation process easily.

On the other hand, you can use the WPS button of the Wavlink AC1200 device and from the existing modem as well. In the first two ways, use the Wavlink default login and other credentials. On the contrary, there will be no requirement for this in the WPS configuration process.

Wavlink AC1200 Reset Password

In addition to that, to reset or retrieve your Wavlink network password, you can also opt for the Wavlink ac1200 reset process. So, choose anyone from both processes and bring the Wavlink device to its non-configured state. After resetting the device, configure it again by using admin as the default username and password. Later, you can set a new password for the Wavlink network from its wireless advanced settings.

Set New Password For The Network

While setting up a new and strong password for the Wavlink network, keep in mind some useful points. Try adding some special and numeric characters as this is a case-sensitive thing. Avoid inserting your personal details like your birth date, phone number, and other related things in the password. Also, it is advisable to change the network password often to make it secure from unauthorized users.

Thus, here are some relevant solutions to your “how to reset Wavlink ac1200 password”. Also, there will be no error left in the AC1200 working for sure. In case you get any difficulty again, then call our technical experts right away at 716-992-6371 or you can drop your doubts at support@wifiwavlink.net.