WL WN575HN2 N300 Extender Setup

How To Login Into Wavlink WiFi Range Extender

• First, connect your N300 extender to a computer with the help of an ethernet wire.
• Now, open Google Chrome and enter the wifi.wavlink.com web address.
• Further, fill in all the details which are shown on the display.
• As a result, after doing all the above steps you will successfully do the Wavlink N300 extender login process.

Perform WL WN575HN2 N300 Extender Setup

There are two methods to configure the Wavlink N300 extender.

Method 1: Attach Extender To Router- By WPS Method

Note: While doing this process make sure your existing router must have the WiFi-protected system button. If your main router does not have this button then change your old router to a new one.

• First, place the N300 extender power plug in a wall socket.
• Now, push the WPS button of the N300 extender.
• After that, inside in two minutes press the host router WPS button.
• Further, a solid blue LED starts blinking on both gadgets.
• As a result, it means the configuration process of the N300 Wavlink extender is completely done.

Method 2: Pair Extender To Router By An Ethernet Cable:

• First, grab one long ethernet wire.
• Now, connect one point of the ethernet cable to a router ethernet port.
• After that, the remaining point of the ethernet cable is to an extender ethernet port.
• Further, settle both extender and router in a power source.
• Next, wait for a few minutes to see the solid blue LED on both the extender and router gadget.

With the help of the above two methods, the WL WN575HN2 N300 extender setup process is completely done.

How To Solve All These N300 Extender Issues

Eliminate Extra Gadgets:

Most of the time, the wavlink extender is not working properly due to most of the WiFi devices linking with your extender network. So we recommend that you remove the extra devices which are not in use.

Note: If you want to check how many WiFi devices connect with your Wavlink WiFi extender network then go to the official website of the wavlink extender. After doing this, the login page of the wavlink WiFi extender opens on your screen and fills in the required credentials. Now, you will visit the settings page of the wavlink extender and find to check the WiFi device. As a result, you can easily see how many devices are linked to your extender.

Update Wavlink N300 Extender Software

Upgradation of software will help you to troubleshoot the extender not working issue. If you don’t know how to update the software of the wavlink extender then follow these steps.

• First, launch a web browser on your mobile phone or on the computer and enter wifi.wavlink.com in the HTML box.
• Now you can see the login page of the wavlink N300 WiFi extender on your display and enter all the required credentials which are needed on the screen.
• Further doing this, you will enter the settings of the wavlink WiFi extender. Now, click on the administration option
• Below the administration option, select the software update option and tap on the wavlink extender software updates.

Reset Wavlink N300 WiFi Range Extender

Note: If the above two solution tips do not help to fix the extender issue then try this last method.

• First, you have to find the reset hole button. Which is mainly located on the back side of the Wavlink N300 extender.
• Press that reset hole button with the help of a paperclip for 8 to 10 seconds.
• Make sure not to press it so hard, otherwise, it can cause harm to your wavlink N300 WiFi extender device.
• After doing this, your wavlink extender device completely reset.

Note: After the reset process you will need to do the WL WN575HN2 N300 Extender Setup process again.

If you have any doubt regarding this Wavlink N300 extender gadget then try to contact our technical team experts by emailing support@wifiwavlink.net or by phone number 716-992-6371.