WL WN531G3 AC1200 Router Setup

Login Into WL WN531G3 AC1200 Router

• First, connect your Wavlink AC1200 dual-band router to your computer with the help of a network cable.
• Now, open navigation on the WiFi-connected gadget.
• After that, enter the web address wifi.wavlink.com web address in the URL bar.
• Now, the AC1200 router login page will be up on your display.
• Further, enter all the required login credentials. Such as SSID and password.
• Check the tag or bottom of your Wavlink AC1200 router device.
• Hence, after doing all the above steps one by one you will successfully login into the Wavlink router.

WL WN531G3 AC1200 Router Setup Process

• First, place the WL WN531G3 AC1200 router plug in an electrical socket.
• Now, attach that ethernet cable provided in the box to the router’s WAN port to the device’s ethernet port.
• Further, turn on your router, and let’s begin the configuration process.
• After that, link your laptop, mobile, and computer to the WiFi network.
• Importantly, launch a web crawler and enter wifi.wavlink.com or 192.168.10.1 IP address in the HTML field.
• Next, on the login page fill in all the required credentials.
• Moreover, it shows the number of connected devices, downloads, and upload speeds.
• Now, go to the ‘Internet speed’ panel, and it displays the connection type. WiFi network name which will be blank and also the connection status. So, give your WiFi network name as you want.
• The ‘LAN’ option will contain all the default IP addresses which are designated to the Wavlink AC1200 router by your Internet service provider.
• Now, go to the ‘Wireless’ Option where you will give the Wi-Fi network names of your 2.4GHz as well as 5GHz frequency bands.
• In the end, tap on the ‘Bandwidth Control’ option and you can set the limit to download and upload speeds of the gadget. Hence, the modem and router were successfully linked with each other.

As a result, with the help of the method, the WL WN531G3 AC1200 router setup process is completely done.

Note: After the AC1200 router setup if you are facing any issues follow the lower trouble then follow the lower three solving methods.

Power-Cycle Your Wavlink AC1200 Dual-Band Router

Due to the Wavlink router overheating, you can face issues with your router. If your router works continuously, without taking any breaks then we recommend you cool down your router by pushing the power button. After 30 mins power on your WL WN531G3 AC1200 router. Hence, the router issue is now resolved.

Upgrade AC1200 Router Firmware

• First, visit the web management page of the Wavlink router.
• Now, find an administration option and then look for the improvement of the firmware option.
• In the end, wait for a while to download the latest firmware file on your laptop and computer.
• Lastly, restart your Wavlink AC1200 router to complete this upgrade.

Reset Wavlink AC1200 Router

Press the reset hole button of the Wavlink AC1200 dual-band router with the help of a paperclip for 8 to 10 seconds. Now, all the LEDs of the Wavlink router will turn off. As a result, it means your device is completely reset and the issue is resolved.

Note: After the reset process of the Wavlink router you will need to do the WL WN531G3 AC1200 router setup process again.

With the assistance of this page, you will successfully do the installation process of the Wavlink AC1200 router in a few minutes. After trying the above troubleshooting tips if the issue is not resolved then you will need to contact our technical team experts. They will help you on every step.