WL WN529B3 AC1200 Router Setup

By doing the WL WN529B3 AC1200 router setup you will get a reliable and stable internet connection with the highest internet speed and a long coverage area. The installation process of this Wavlink AC1200 router model is so easy and simple. Read this full page to get the proper information about this WL WN529B3 router device.

Specifications Of WL WN529B3 AC1200 Router

• WL WN529B3 AC1200 router works with the IEE802.11a/b/g/n/ac standards.
• You can easily do the login process by the app or by the web browser.
• By pushing the WPS button of the router you can easily connect your extender to the router.
• It is mainly built in the DHCP server with an automatic dynamic IP address distribution.
• External antennas of this Wavlink router provide stable WiFi signals in all directions.

How To Visit The Wavlink Web Management Page

By Web Browser

• First, connect the WL WN529B3 AC1200 router to your computer by an ethernet cable.
• Now, launch chrome on the WiFi-connected gadget.
• After that, write the wifi.wavlink.com web address in the chrome URL bar.
• Now, a Wavlink AC1200 router login page will be up on your screen.
• Further, insert all the information which is shown on the login page. Such as SSID and password.
• Check the tag or bottom of your Wavlink router device, in case, if you don’t know the credentials.
• Hence, after doing all the above steps one by one you will successfully do the Wavlink AC1200 router login process.

Join Wavlink AC1200 Router To Modem

• Initially attach one of the ethernet cables to the router.
• After that, join the remaining end of the wire to the modem.
• Now, attach the modem power cord to an electrical outlet.
• Next, take one long ethernet cable and connect it to the back of the modem.
• Further, link the remaining end of the wire to the Wavlink AC1200 router WAN port.
• In the end, place the router power plug in a wall socket.

If the LED light of the router and modem starts blinking solid, then it means the WL WN529B3 AC1200 router setup process is completely done with the router.

Note: If you want to extend the range of the router then you will need to connect an extender to the router.

Pair Extender To Router By WPS Button

• First, locate your extender near the router.
• After that, press the WPS button of the Wavlink AC1200 router.
• Further, within two minutes push the extender WPS button.
• Now, a solid blue LED starts flashing on both gadgets.
• As a result, it means both the extender and router gadgets are successfully linked with each other.

Note: In case, after the WL WN529B3 AC1200 Router Setup process you are facing any trouble then you will need to consider the below solution tips.

From Ethernet Ports, Take IN and OUT Cable

At the back side of the Wavlink router device, you can see an ethernet cable that is connected to the router’s ethernet port. Remove the cable from the router’s ethernet port. Now, again place one end of the ethernet wire in the modem ethernet port and the remaining end of the wire in the router yellow ethernet port.

Upgrade Wavlink AC1200 Router Firmware

• First, go to the Wavlink AC1200 dual-band router web management page.
• Now, look for the administration option and then find the improvement of the firmware option.
• After that, on your laptop and computer download the latest firmware file.
• In the end, restart your Wavlink AC1200 dual-band router to complete this upgrade.

Reset Wavlink Dual Band Router

Press the reset hole button of the Wavlink dual-band router with the help of a hairpin for 8 to 10 seconds. Now, on the Wavlink AC1200 router, all LEDs will turn off. As a result, the Wavlink AC1200 dual-band router device is now completely reset.

Note: After the Wavlink router reset process, you will need to do the WL WN529B3 AC1200 router setup process again.

After the assistance of this full page, you will get full knowledge about the WL WN529B3 AC1200 router device. If you are unable to get the solution to your router issue, then you will need to ping our team experts by sending mail to support@wifiwavlink.net or by phone number 716-992-6371.