Wavlink WiFi Repeater Instructions For Configuration

Wavlink Range Extender Setup is an ideal device that you can use to get strong internet signals and the highest internet speed as well. No matter whether it is your home or office, it covers every place. Through this article, we will discuss the wavlink WiFi repeater instructions to set up and troubleshoot the issues. Basically, you can configure your wavlink range extender setup in two different ways: the web-based portal and WPS methods. We will clarify these processes separately.

Wavlink Range Extender Setup Using Web Portal

In this case, you can use the extender’s web-based setup page for configuration. Plug the extender into the power socket first, and wait for a few seconds. Then, utilize the rest of the steps for a wireless connection.

• After plugging in the extender, open the WiFi network list on your device.
• Connect the device to the appropriate wavlink WiFi network.
• After that, launch any web browser on the connected device and search for the extender’s default IP address that is 192.168.10.1.
• As you search for the IP address, a login page will appear on the screen.
• Here, use admin as the username and password in the login field.
• On the next page, click the Repeater option and select your WiFi signal.
• Then, insert the password of your router in the box.
• Following this, click Connect and wait for a few minutes to let the process complete.
• The LED on the router must turn Solid Blue which indicates the router is giving a strong signal.

Wavlink WiFi Repeater Instructions For A Wired Connection

In any case, if you don’t want to or are not able to make the wireless connection that is through a WiFi network. Then you can opt for the wired connection. Follow these wavlink WiFi repeater instructions.

• Take a new or working ethernet cable to make the connection.
• Insert one end of the cable into the router’s port and another into your PC’s port.
• Ensure that the connection between them is successful.
• Thereafter, open the web browser on your PC and search for the extender’s IP address.
• Do the login there, by inserting admin in the required login field and start the setup process.
• After some time, the setup process will be completed.

Note: After logging to the web page, create a new and strong password for the router network to make it secure. Apart from that, choose your region and time zone there.

Wavlink WiFi Repeater Instructions For WPS Method

Aside from that method, you can use the WPS feature to install your extender. To do this, fix the extender into a power outlet and make it ready to set up. Make sure that your router has a WPS function.

• When your extender flashes red light, it means it is in ideal condition.
• Next, press the WPS button of your existing router for about five seconds.
• Wait until the LED on the router starts flashing.
• Afterward, push the WPS button on the extender within the next two minutes.
• Then you will see changes in the light indicator, meaning the extender is connecting with your router.
• After around one minute, the extender’s light turns solid blue.
• Thus, the setup process of your extender is complete.

Note: When you are done with the extender configuration, you can move and place your extender at a different spot or at the desired location. But, be sure that your extender is in the signal range of the existing router.

Troubleshooting Ways For Wavlink Extender Setup

In case you face any issues during the installation or working process of your extender, try to identify the reason first. Consider and utilize these points to get rid of the troubles.

• Initially, place the extender near the router during the setup process.
• Make sure that your existing router is working and has a strong internet connection.
• Additionally, your device must be connected to the router, whether it’s a wireless or wired connection.
• Use the perfect username and password of the extender on the web-based setup page.
• Also, use the correct IP or web address of the router on the web browser.

After following these points, if you are not still able to get an uninterrupted signal, then opt for the reset function. Disconnect all the devices from the extender and press the reset button for some seconds. Wait for some time and let the extender perform its factory default settings. After this, do the configuration again and make the connection.

Besides that, check the current firmware version of your extender and confirm if there is any new version available. If there is any availability, then download the firmware file of your extender accordingly and upgrade it. The latest firmware will surely enhance the working of the extender.

To Conclude

You can use any of these methods and these Wavlink WiFi repeater instructions to configure your Wavlink Range Extender Setup easily. However, if you still face any hurdles during the procedure, then feel free to contact customer service to get personal assistance.