WL WN583A6 AC2100 Extender Setup

To improve the range of the WiFi signal, the WL WN583A6 AC2100 extender setup can be a reliable device. AC2100 extender gadget also helps to remove all the dead spots areas of the office and house. You can quickly do the configuration process by yourself after getting proper information about the process. Get the knowledge here and begin the setup process.

How To Login Into This Wavlink Extender Gadget

Just simply, consider the lower steps of the WL WN583A6 AC2100 extender setup process.

• First, place the extender plug in a wall socket.
• By wireless or cable you can easily do the connection.
• Now, connect your extender to a computer by ethernet cable or connect the computer to the Wavlink_EXT network.
• Open the web browser and enter the IP address 192.168.10.1 in the find bar.
• Following this, insert all the required credentials which are prompted on display.
• As a result, you will successfully login into the WL WN583A6 AC2100 range extender.

Configure WL WN583A6 AC2100 Device By WPS

For the configuration process of the Wavlink AC2100 device, you will need to observe the lower steps and follow all the steps one by one.

• To start, you will require to locate your Wavlink WiFi extender gadget closer to the host router and place the extender into a wall plug.
• Next, press and hold the extender and the router WPS button.
• After doing this, a solid blue LED on the extender will be turned on.
• That means your extender device is successfully linked with the host router.

WL WN583A6 AC2100 Extender Setup By Web Browser

• Initially, you will require to launch navigation on your mobile phone and computer.
• Further, insert the IP or web address.
• Now, in the required blanks user name and security password.
• After doing this, you will directly visit the configuration portal of the WL WN583A6 AC2100 extender setup.
• Lastly, follow all the details which are seen on display.

Installation Of Wavlink AC2100 Extender By AP Mode

• First, attach one end of the ethernet cable to the extender LAN port.
• Now, connect another end of the cable to the router LAN port.
• Further, open the updated navigation and enter the IP address 192.168.10.1 in the location bar.
• Next, hit on the access point mode and hit on next.
• For the new AP mode, make the SSID and security password.
• Finally, follow all the display instructions and do the configuration process.

After the WL WN583A6 AC2100 extender setup if you are facing any issues with the extender then follow the lower troubleshooting tips to fix them.

How To Fix All Kind Of Wavlink Extender Issues

• Initially, you will be required to check the status of the LEDs.
• Turn on and off both your extender and router gadgets.
• Remove all the extra devices that link with your extender network.
• Try to select another placement and different navigation during the setup process of the Wavlink WiFi extender.
• Verify the gap between the extender and the router gadget.

Note: Follow the below additional tips if your Wavlink extender issue is not solved.

Upgrade WL WN583A6 AC2100 Extender Setup Firmware

To upgrade the firmware of this Wavlink extender model, observe the lower steps and do them one by one.

• Initially, in the URL bar insert the IP address 192.168.10.1.
• Now, put in all the right login credentials in the required blanks.
• After that, look for an administration option and below that option click on software update.
• In the end, wait for the complete downloading of the firmware file on your laptop and computer.

Change Wavlink AC2100 Extender Placement

To change the placement of the Wavlink AC2100 extender, make sure you don’t locate your extender near metallic objects. Metal appliances absorb the WiFi signals which come from the host router and extender. The central location of your house and office is the best placement for the extender.

Reset Wavlink AC2100 Extender

To fix the Wavlink extender issue, study the lower steps.

• First, look for the reset hole button and take the paper clip.
• Now, insert that paper clip in the Wavlink AC2100 extender reset hole button.
• Further doing this all the LEDs will be now turned off.
• As a result, your WL WN583A6 AC2100 extender is completely reset.

Note: After doing the reset process you will be required to do the setup process again.

In case you are facing any difficulty after trying these resolving tips in the Wavlink extender. Then you will require assistance from our Wavlink customer service technical experts to fix that extender issue.