Wavlink Router Blinking Red Light Issue & Troubleshooting Guide- A Complete Analysis
Several issues are there you may encounter with while using Wavlink Router. Wavlink Router Blinking Red Light Issue is one of such issues. It indicates several underlying issues with the router device. These issues may be related to connectivity problems or router malfunctions. Addressing the issue is very crucial for maintaining a stable internet connection. Now the question arises what red light on a router device indicates, how to diagnose the problem and what steps are needed to take to solve it. Answers to all such questions are available below.
Further page is designed specifically to furnish all the comprehensive analysis of the potential causes of the blinking red light. Furthermore, you will also get the steps to address the problem and restore normal operations of your router device.
Understanding Router Blinking Red Light
Blinking a red light on a wavlink router generally indicates connectivity issues or malfunctioning. Here are the probable reasons why your router is showing red light:
Wavlink Router Blinking Red Light Issue: Troubleshooting Steps
Check Internet Connection
First step in the troubleshooting steps is checking your internet connection. You need to confirm that your modem is properly connected and functioning. To do so, you have to check the indicator lights on the modem device. In case the modem is working properly then try restart both modem and router device. You need to plug- out both the devices and wait for 30 to 40 seconds. Thereafter re-plugin both the devices. If the issue still persists, check the wires connecting the modem and router with each other. You need to replace the damaged cable if any.
Avoid Continuous Use of Router
It is possible that you are using a router device continuously and it gets overheated. Turn off the power of the device for a few minutes in regular intervals when not using it. Avoid the placement of devices in the location exposed to direct sunlight. Furthermore, keep the router device clean.
Keep Router Closer to Modem
To avoid connectivity issues, must place the router in the midway of the modem and no signal zone area. In case your router is blinking red, move the device a bit closer to the modem.
Avoid Wireless Interference
Many electronic devices like microwaves, cordless phones, television etc. create interference in signal transmission. Eliminate all such device placements in between your router and modem places. Moreover, do not place any heavy metal equipment closer to the modem or router.
Inspect Router Settings
You need to inspect the router settings and ensure that there is no error in WAN configuration. Connection type you have selected accurately. Then check for the firmware update. If there are any pending updates, run update first. An updated firmware often includes bug fixes and performance improvements. Thus, it may solve your connectivity issue.
Examine Wireless Settings
Must ensure your wireless settings are correct. Check that your SSID is visible completely and wireless bands are enabled. If everything is ok, then move further and change the wifi channel in the router settings. This may improve signal quality.
Perform A Factory Reset
If any of the above troubleshooting points doesn’t work for you and problems still persist, then you can try resetting your router device to factory settings. To perform factory reset, you need to push the reset button on the router device. Hold the button until the LED on it turns off. Hence, your device factory restoration is complete. Then you need to re-configure its settings. This may resolve the issue you are facing.
