What Is The Right Process For Wavlink Extender Login?
Do you wish to alter the default login password or want to scan for new updates that your Wavlink extender might have? If the answer is yes, then for doing these tasks and for overall management of the device you need to conduct the errorless Wavlink extender login process. The process is simple and is widely done using an internet browser. But for your convenience in this particular blog post, we’ll list two different login methods. One is a traditional approach that is using an internet browser. Whereas the second method utilizes the app named WavRouter. So to check out the exact steps for both methods, keep reading.
Wavlink Extender Login: Method 1
First let’s list down the steps for a web browser based login method.
- Start the process by activating the Wavlink extender. As you initially power on the extender, wait for the status indicator to turn steady.
- Thereafter, pick your laptop or any other smart device. Also fetch the wireless defaults that are written on the base of the Wavlink extender.
- As you collect both these things, activate the wifi of your smart gadget. Now pair the device with extender’s network using the information that you collected.
- After that, on the paired gadget open internet browser. The browser should be compatible and not corrupted.
- Go to the address column. Here type in the IP address. It is 192.168.10.1. Click the enter key.
- Now to access the panel, fill in the password. By default it is “admin”.
- After typing the password as soon as you click on the Login option, you’ll successfully finish the Wavlink extender login process.
Note: In case you aren’t able to pair the extender with the smart gadget using wireless method then you can establish a direct connection with the help of Ethernet wire.
Method 2: Using WavRouter App
The second option through which you can finish the Wavlink extender login process is using the WavRouter application. The steps for it are:
- First take your smartphone. On it, launch Play/App store. In the search column, type WavRouter. Thereafter tap on Install/Get.
- After the app is installed, power on the Wavlink extender. As the booting completes, its network becomes discoverable.
- So pair your smart gadget to the extender’s network.
- Finally, open the WavRouter app and fill in the login information for accessing the main panel.
No matter which option for Wavlink extender login you choose, both are easy and straightforward.
Solving Login Issues
No doubt the login process is simple but technology is such that it can create a ruckus anytime. So if you are facing any problem with the login process, then consider these troubleshooting points:
- First if the extender’s wireless network isn’t showing up in the list of available networks, then you can power cycle the extender as well as the device through which you are conducting the Wavlink extender login process. Secondly, you can choose to fill in the details manually. The third option is using ethernet wire and skipping the wireless connectivity method.
- Sometimes the browser can also create a hindrance. So first pick a compatible browser. These are internet explorer, chrome, firefox, safari as well as edge. Next, scan for pending browser updates. If available, install them. In addition to it, delete all browser caches and cookies.
- Thereafter, the problem could be with the login address. So make sure there are no typing mistakes in it. Apart from 192.168.10.1 you can use wifi.wavlink.com.
- Next up, try using a different smartphone for Wavlink extender login. Also ensure there is adequate electricity supply to the networking device.
- When each one of the above written troubleshooting steps fails, factory resetting is the only option left.
If the problem continues, then do not waste a single moment further and rather take assistance from our experts.