How to fix if Wavlink extender not working?

First, check the power LED on your extender to ensure that it’s blinking orange. Check the WiFi network name you’re connected to. It should be with _EXT

Wavlink AC1200 Setup Guide | Easy Installation & Troubleshooting Tips

The Wavlink AC1200 range extender is designed to boost and extend your existing network coverage. The device is used to boost the coverage of the network and eliminate dead zones. Take the signals from the router device and rebroadcast them. The device works as a bridge that eliminates the gap between the router signals and wireless enabled devices. Configuring the Wavlink AC1200 is a straightforward and easy-to-follow process. You can follow the wavlink ac1200 setup instructions to add the device into your existing network. Follow the guide and boost your current network.

Wavlink AC1200 Range Extender Setup: Whole Guide For New Users

Wavlink AC1200 Setup Requirements

Add the wavlink AC1200 range extender device to your existing network after accumulating the necessary items:

Wavlink AC1200 range extender.
Power adapter
Power outlet
Ethernet cable
Computer/ laptop
Working internet connection
Router’s network name and password

After accumulating every detail mentioned above along with the items, you need to start the wavlink AC1200 installation. Installation of the device should be done properly for best performance.

Wavlink AC1200 Installation

Wavlink ac1200 repeater setup will begin after the installation of the repeater device. Follow the instructions mentioned here to install the device.

Unboxing

Unboxing the device will be the first step of the installation. Take the repeater out of the box. Check the box also has wavlink AC1200 manual, ethernet cable and power adapter device.

Placement

Place the extender is the next step of the wavlink ac1200 installation process. This step is very important. During the setup process, the extender should be placed close to the router to ensure a strong and stable connection.

Powering

Powering is the third step of the installation process. This step requires an adapter along with a power outlet. Insert the power pin into the repeater’s power port, then plug the device into a power outlet to turn it on.Turn on the power and wait for the device to wake up completely.

Wavlink AC1200 Setup Using WPS

Wavlink AC1200 Setup using the WPS button is the quickest and easiest method. Using this method you can easily add the extender into the existing network. This is the quick connection method. Check the Wavlink AC1200 configuration steps:

Push Extender Button

First step of the wavlink ac1200 repeater setup is pushing the extender’s WPS button. Extender device button push will lead to LED start blinking fastly.

Release The Button

Release the button as soon as the LED begins to blink rapidly, indicating that the WPS pairing process has started. In case the LED didn’t blink fast then you have to wait till it happens.

Push Router Button

Now within the next two minutes you have to push the WPS button on the router device. In case you take more time then the process fails. So, be careful and press the button within the time.

Monitor Extender

Step ahead in the wavlink ac1200 setup process and monitor the extender device LED. When the device’s WiFi LED starts along with WPS then the setup completes. Perform a network test first and then you have to relocate the extender to boost the network.

Wavlink AC1200 Setup Using Web

Wavlink AC 1200 setup instructions using the web are specified below. You have to follow the steps to add the device into your network.

Connect To Extender Network

First step of the web based wavlink ac1200 repeater setup is establishing a connection between computer/ laptop device with extender’s network. For establishing this connection you should go with one of the below given methods:

Wired method: Ethernet cable is used to connect using the wired method.
Wireless method: Wireless method requires network name and its password. In your laptop or computer search for a network and mention the password.

Launch A Web Browser

Launch a web browser’s updated version. Google chrome, mozilla firefox, internet explorer or any other browser can be used. Don’t forget to erase the cache and cookies as it might interrupt the access of the wavlink ac1200 setup page.

Access Setup Page

Get Wavlink AC1200 setup page access by entering wavlink.com or the IP address 192.168.8.1 into your web browser’s address bar. Then the admin access page appears. You need to access it by entering the default login details. Default details are mentioned in the wavlink ac1200 manual. Enter them and click the login option.

Configure Extender

Begin the wavlink ac1200 Configuration further by following the screen. Now initiate the search for an available network to connect. Next, you’ll need to enter your router’s password to establish a secure connection between the extender and your existing network. Click the save option.

Secure Network

Create a unique SSID and a strong password for the Wavlink AC1200 network during the setup process. After that you need to change the admin account default username and password also.

Firmware Update

Next step of the process is to update the firmware. You can update the firmware either automatically or manually, simply choose your preferred method and follow the on-screen instructions to complete the firmware update.

Final Submission

Submit the changes you made in the wavlink ac1200 network settings. Be sure to review all the changes you made to the network settings before finalizing the setup.

Network Testing

Performing the network test is very important to boost the network. To test the network, connect your smartphone to the new Wavlink AC1200 network, browse the internet, and check the coverage to ensure everything is working properly.

Relocation

Relocating the range extender device to a new location. Relocation is needed to boost the network. While placing the extender again you need to focus on following:

Find a midway location which is in between the router and the area where you were facing the issue.
Make sure there is no radio frequency device.
Avoid keeping the heavy metal object nearby. If placed then eliminate it.
Not to keep the extender in the corner or next to thick walls.

Wavlink AC1200 Troubleshooting

Are you facing Wavlink AC1200 no internet connection or any other network issue? If yes then you should follow the below specified troubleshooting steps to resolve the problem. Here are the tips:

Inspect The Host Router Network

Before troubleshooting the extender, verify that your main router is functioning correctly. Ensure it’s broadcasting a stable internet signal and that other connected devices can access the internet without interruptions. Log in to the router’s settings page and check the network status, signal strength, and bandwidth availability. Fix any router-related issues first for smoother extender performance.

Inspect The Hardware Connections

Loose or damaged cables can cause connectivity issues. Check the power adapter, Ethernet cable (if used), and wall outlet connected to your Wavlink AC1200. Ensure the power LED is stable. Inspect the router’s ports and the extender’s hardware for physical damage. Try plugging the extender into a different power outlet if needed. Proper and secure hardware connections are essential for maintaining a consistent signal and preventing device malfunction.

Place Extender Closer To Router

Location matters when using a WiFi extender. If the Wavlink AC1200 is too far from the host router, it may receive a weak or intermittent signal. Place it midway between your router and the area with poor coverage. Avoid walls, metal objects, and electronic devices that could interfere with the signal. Once relocated, wait for the signal LEDs to show a strong connection. An optimal position helps the extender relay a stronger, more stable signal.

Reboot The Extender

Rebooting the extender can resolve minor software glitches and connectivity issues. To do this, unplug the extender from the power source, wait for about 10–15 seconds, and then plug it back in. Allow the device to fully reboot and reconnect to the router. Rebooting refreshes the network configuration and can often restore connectivity without the need for complex troubleshooting. Make this a first step before diving into deeper settings or reset procedures.

Update Router’s Firmware

Outdated firmware on your router can lead to compatibility issues with your extender. Log in to your router’s admin panel, inspect for available firmware updates. Manufacturers regularly release updates to improve security, performance, and device compatibility. Install the latest version. This ensures smoother communication between your router and the Wavlink AC1200 extender, enhancing overall network stability and minimizing connection drops or performance lags.

Factory Reset & Configure Again

If all else fails, perform a factory reset on your Wavlink AC1200 extender. Use a pin to press and hold the wavlink ac1200 reset button for 10 seconds until the LED flashes. This will erase all previous settings. Then, follow the setup instructions from the manual or web interface to reconfigure it from scratch. Choose the correct SSID, password, and positioning during setup. A fresh configuration often resolves lingering issues and gives the extender a clean slate to operate efficiently.

Conclusion

You can easily set up the wavlink ac1200 device. Furthermore you can also perform wavlink AC1200 outdoor setup to extend the network outside your home. In case you got stuck while performing the setup or resolving the issue then you can connect our technical team for help. Our tech team will help with every step where you get stuck. Call our team now!