Troubleshooting All Problems With Wavlink AX3000 Extender

Networking devices have a very dynamic nature. Within a blink of an eye, they may start acting weirdly. The same is the case with the Wavlink AX3000 range extender. So if you also own this networking gadget from Wavlink and are facing various problems like sudden connection drop, aren’t able to login or there are any other wifi connectivity problems. Then this Wavlink AX3000 troubleshooting guide can lend you a helping hand. There can be multiple reasons as to why you are facing a problem with the extender. But fortunately no matter what the issue is, it can be solved easily with the right guidance. So let’s check out the same. 

✓ Power Cycle The Repeater

Before you dive deep into the advanced Wavlink AX3000 troubleshooting steps, do the simple and yet impactful step which is rebooting of the extender. For reboot follow these simple guidance:

• Unplug the signal repeater from its power outlet. Also detach external peripherals if connected including wires. 
• Now let the extender sit in a state of complete rest for about a minute. 
• Thereafter, move it back into its outlet. Turn on. With this the connectivity problems will go off. But if they still reside there, then continue with the further steps. 

✓ Update Extender’s Firmware 

The most common culprit behind Wavlink AX3000 connectivity problems are pending firmware updates. Users do not pay attention to the updates because they find them unnecessary. But the fact is keeping your system’s firmware up-to-date means no connectivity problems, you also get access to new features and there are no security threats as well. So after you login into the main management page. Go to the Advanced section. From there pick Firmware Upgrade option. Choose the downloaded firmware file. Finally, tap on Upload. With this the installation will begin and as it completes the extender reboots itself to apply the same. This is a very effective Wavlink AX3000 troubleshooting step, so do not skip it. As this can save you time in doing other troubleshooting steps that are of no use.

✓ Ensure Right Placement Of AX3000

Sometimes improper placement is also the reason behind connectivity issues. Thus you end up searching for the Wavlink AX3000 troubleshooting guide. So follow these placement strategies, for seamless connectivity:

• First plot the extender in an area where the signals from the router are decent which means not less than 50 percent. 
• Next up, the chosen spot shouldn’t have too many barriers. Barriers like heavy furniture set, concrete walls including glass walls. Additionally, if you have kept metal or electrical items nearby to the signal repeater then these objects can be the potential threat for the signals. So consider removing these objects. 
• Lastly, try placing the signal booster in an open area where the ventilation is proper. Moreover do not keep it inside a box, in a corner or directly on the floor. As this won’t provide you seamless connectivity. 

✓ Change The Wireless Channel

Sometimes the wireless channel on which your router is operating might interfere with the signal booster’s signals. So consider changing to a different channel. For doing so, on the networked device open the internet browser. In the URL column, fill http://192.168.10.1. Click Enter. Fill up the password. Tap on Login. From this main page navigate to wireless settings and from there you can easily alter the channel. 

If none of the above written Wavlink AX3000 troubleshooting steps solves the issue, then you need to head for the factory reset. With this your signal booster will revert back to the same settings as it was when you first bought it. With this you’ll be able to redo the setup from scratch.