Macard WiFi Extender Setup

Desire to extend your existing network coverage using a wifi extender device. Don’t know how to add an extender device to your home network. Why to worry when we are here to help. Easily extend the coverage of your home network with Macard wifi extender. For all those who are planning to add Macard wifi extender to their existing network, this information is very valuable. Further we are going to provide detailed instructions on Macard WiFi Extender Setup. You can follow the procedure to complete the configuration without any hassle. 

Installation Of Device 

You can easily install the Macard WiFi Extender device by following a few simple steps. These steps will help you in completing the configuration without any trouble. 

• Carefully take out the extender device out of the box. 
• After that you have to look for a position where you desire to install the extender device. Keep it proxy to the host networking device. 
• Next you have to take the device and connect it to the wall socket. 
• Then start the power supply of the device and wait until the device powers up properly. 

After following the above specified steps you can easily perform Macard WiFi Extender setup by opting any of the below given methods.

WPS Button Based Method 

You can easily perform Macard WiFi Extender setup using the WPS button based process. Steps you should go with under this method are:

• First you need to locate the WPS button on the extender device. 
• Then locate the WPS button on your host router device. 
• Push the button on the extender device and after that on the host router device within two minutes. 
• Now just monitor the device LED behaviour which will help you understand whether the process is a success or a failure. 
• In case the LED turns red in color it signifies that the process has failed. You have to try again to configure the device once again. 

Web Based Setup 

To proceed with the web based Macard WiFi Extender setup you have to choose a client device that has an updated web browser. Steps involved in the web based setup method are as follows:

Connect The Client Device To Extender Network

First of all you need to connect your client device with the extender network. If your device supports ethernet connection then use an ethernet cable for the connection. On the other hand if not then you can use the wireless network to establish the connection. For wireless connection, rush to the settings on your device and search for the extender WiFi name.

Access The Web Interface

Further you have to open a browser in your client device and go to its URL bar. In the URL bar you have to specify the IP address 192.168.10.1 to open the web interface. After that login to the interface to rush further to complete the configuration.

Configure Settings

As you get the access to the dashboard you have to connect it with the router’s network first. For the connection select the router’s network name from the list and enter its password. After that change the network name and password of your extender network. Also update the admin account standard details to keep your network secure. Update the firmware and save the changes you made to complete the Macard WiFi Extender setup. 

Relocate Extender

Relocate your extender device after the setup is done to boost the network performance. Make sure the extender is to be kept within the range of your host router device. Also do not place it next to the network interfering device that interrupt signals.

Connect Us

Macard WiFi Extender setup process specified above is very clear using both the methods. You can easily follow the process to complete the configuration of your device on your own. But in case you found any difficulty with the setup process then you may contact our team for help. Our team is just a call away from you. You can connect our team on the below available number and get assistance. Our experts can help you in boosting the network, performing the setup, troubleshooting the issue you encounter and setting up a better network.