wifi wavlink

Linksys Velop Setup

Live Chat

Live Chat With Experts and Get Real-Time Responses.

Let’s Talk

Don’t Wait, Then You Can Call Us Right Away.

Did you just get your hands on Linksys Velop and are looking for its easy setup guide? Or you tried setting it up but facing issues? If yes, then do not worry as it happens to most of us. Let us guide you through the correct setup process. We will provide two detailed methods for Linksys Velop Setup. You can choose one and pursue it. We will try to make the whole process as simple and straightforward as possible. So without further delay let’s just get started.

Method 1: Using The Linksys App

To set up your Linksys Velop using the Linksys app, follow these easy steps:

  • Firstly, you have to connect the modem and the primary velop node together. Take out the provided Ethernet cable and connect its one end to the modem and other end to the velop node.
  • Now, take the power adapter and connect it to the velop node. Once connected, plug it in the power outlet. Power it on. Wait for a few seconds to let the setup boot up completely.
  • Next, download the Linksys App on your device. The app is available on both the App Store and the Google Play Store.
  • Further, it’s time to create your Linksys account. To create an account just follow the on-screen prompts. If you already have your Linksys account then log in into it by using the accurate details.
  • As you login, the app will start guiding you further. You just have to follow all the instructions precisely.
  • Once you login you can also change the settings. We advise you to create another network for your guests and visitors. Also, change the default login details for your better hold on security. The password should be something complex and unique. Do not use common passwords like your date of birth or any other important names and dates.
linksys velop setup
  • Once everything is done finally, test your Wi-Fi network. Check the signal strength in various locations. You can adjust node placement as necessary for better coverage.

Method 2: Using A Web Browser

Your Linksys Velop Setup can also be done through the web browser. This method is also very easy and quick. Start the process by connecting the modem and the velop node. Use Ethernet cable to connect them together. To power on use the given power adapter. Once done follow the below mentioned steps for the successful outcome.

  • Firstly, you have to connect your computer system or your smartphone phone to the Velop node. For wired and direct connection you can use an Ethernet cable. For wireless connection you have to visit the Wifi settings of your device. In the list of available networks search for the network name Linksys. As you find it, click on Connect.
  • Now, go back and open any web browser of your choice. In its address bar type http://www.linksyssmartwifi.com and press Enter. This action will take you to the Linksys Velop’s login page.
  • Further, you will be asked to enter the username and password. For accurate details use the user manual as per your specific model.
  • Finally, as you log in successfully, you just need to follow all the on-screen instructions stepwise for completing the setup process.
  • If you want more coverage then you can add more velop nodes. Use power adapters to power them on. Make sure the additional nodes are not too away from the main node.
  • Lastly, check the connectivity and signal strength. Walk around your home or office to test various locations. Adjust node placement if needed for better coverage.

And that’s all for the web browser based Linksys Velop Setup.

Troubleshooting Common Linksys Velop Setup Issues

  • Firstly, check if your device is properly powered on or not. Check that the power adapter is plugged in tightly. If the power light is off then try a different outlet.
  • Next, verify your internet connection. For verification connect your modem directly to a computer using an Ethernet cable. If the internet works then it means the modem is functioning correctly. If not, then you should contact your Internet Service Provider for assistance.
  • Once your internet connection is confirmed, check your Velop node placement. Place the nodes in an open and central area. Keep them away from walls and obstructions. Avoid placement of any electronic gadgets near to the nodes.
  • In addition, verify your Wi-Fi network settings. Make sure you are connecting to the correct network name and also typing the correct login details.
  • Moreover, check for any pending firmware updates. Keeping your devices updated ensures best performance as well as better security. For updating the firmware you have to open the Linksys app, navigate its settings, and check for updates. If an update is available then install it immediately.
  • Further, if the Linksys app is not working then you can uninstall it and download it again. It will refresh the settings.
  • Lastly if nothing works then try resetting the entire setup and restart the process all over again. Feel free to contact Linksys customer support team for assistance.