How To Fix The Wavlink Extender That’s Not Working ?
The problem of the Wavlink extender not working is quite common. There can be numerous reasons behind this problem like pending updates, loose wiring, inadequate supply of electricity, interference from neighbouring gadgets, incorrect configuration and much more. But no matter what the root cause is, the issue can be resolved easily by following a few troubleshooting steps. So in this blog-post, you’ll get to discover all such solutions. We’ll list complete details from rebooting to resetting of the device. With no more stalling let’s get to the dependable solutions.
✓ Proper Configuration Guide
The very first reason that can potentially be behind the Wavlink extender not working problem is incorrect configuration. So for right installation, follow below written guidance:
✓ Look Out For Firmware Updates
Pending updates can affect the working of your Wavlink extender. So it’s an expert recommendation, to always keep the firmware to the latest. To scan for updates, login into the main interface via www.wavlink.com. Then from the dashboard choose the option of setup. Scroll down and there you’ll get access to the firmware upgrade option. Start the installation of new updates by adhering to the interface instructions. Once it’s done, you won’t face the problem of the Wavlink extender not working.
✓ Placement Is Key
Not only pending updates or incorrect configuration but also incorrect placement of the extender can lead you towards the Wavlink extender not working issue. So plot the extender in an area where the router’s signals are not less than 50 percent. Moreover this spot should also be close to the area where you have connectivity problems. Always keep the repeater in an open space and not in a corner, behind furniture/ curtains or inside any box. Moreover, electrical and metal objects should also be kept away from the Wavlink repeater. As they can block the signals from travelling to different locations.
✓ Rebooting: A Quick Fix
When the Wavlink extender not working issue pops up suddenly it can also be because of the overheating of the device or due to minor technical glitch. In both the scenarios, rebooting can fix the issue within seconds. So for rebooting, unplug the wires from the extender. Then detach the power wire from the socket. Let the extender stay in this condition for about 60 seconds or till its body reverts back to normal room temperature. Thereafter re-attach everything back. As you repower the device, the issue might not persist any longer.
✓ Reset: The Ultimate Saviour
Before you choose resetting as a troubleshooting step for a Wavlink extender not working problem, make sure you have tried every other possible solution. Resetting process:
