logo
Search

How To Conduct Wavlink N300 Setup Via WPS and Web Browser

Jonewavewifi

Users who are looking forward to leveling up the performance of their wifi connectivity should definitely consider Wavlink N300 wifi range extender setup. After the successful installation of this magical networking device, you’ll be able to eliminate dead zones, issues of slow speed as well as problems of sudden connection drop. So in this blog post we’ll be helping you out with the Wavlink N300 setup. The guide contains two different methods out of which one is traditional and is done using an internet browser. Whereas the second one offers quick installation which is done using the WPS button. No matter which setup method you pick, the outcome will only be in your favor.

Wavlink N300

Wavlink N300 Setup Requirements 

For N300 range extender setup the requirements are as follows:

  • A router and active internet connection.
  • Next you require a smart device like laptop, computer system, cellphone or you can also use your iPad. 
  • Thereafter the need is for Ethernet cable. Although it is optional. But users who prefer wired connection over wireless, then this is essential for them. 
  • Moving forward, note down the details of the network that you are going to extend using Wavlink N300 wifi range extender setup. 
  • Make sure you have a vacant power socket near to your router for a strong connection. 
  • Lastly, for extracting the default information keep the Wavlink N300 manual by your side. 

Note: In case you do not have access to the user manual in hand then you can download the Wavlink n300 manual pdf from Google. 

Wavlink N300 Setup Guidance: Using WPS

The setup process using the WPS button is so simple that it just takes less than 10 minutes to complete it. 

✓ First take the Wavlink N300 device in the same area where your router is configured. Now plug it in. Turn on. The device requires a little time to start up properly. So ensure you allow it that time. 

✓ Moving further, knock down the wifi protected setup (WPS) key on the N300 device. As you do so, immediately take a turn towards the router. Knock down its WPS key as well. 

✓ As soon as you complete this task the WPS LED on both the devices activates. It indicates that the wavlink n300 wifi range extender setup is under progress. Finally, you just need to allot time to the gadget. As the process ends the LED’s stops flashing and rather solidifies.

✓ Lastly, unplug the Wavlink N300 setup. Plot it at an equal distance from the router and the area where you were facing connectivity issues. Just ensure that the placement spot you pick should receive at least 50 percent signals from the router. As it is necessary for proper working of the N300 device.

Setup Via Internet Browser 

This setup method offers more network security and also gives you access to various settings options through which you can use the network as per your needs. Before proceeding with the setup steps, ensure accurate placement of N300. As it directly affects the final outcome. So plot the N300 device in an open and well ventilated area. Try placing it where the physical obstructions are minimum. Also avoid its plotting nearby to the electrical and metal objects. The ideal place where you should carry out the Wavlink N300 setup process is halfway from the router and the area where you are looking forward to extending the wifi coverage. 

  • Installation Steps

✓ After finalizing the placement spot for the N300 device, turn it on. Let the device start up properly.

✓ Now, you need to take your smart device and connect it to the N300 network. The exact connecting details are written in the Wavlink N300 manual and well as on the N300 device’s panel. Users who want simple, quick and stable connection can opt for ethernet cable. 

✓ Thereafter on the networked device, launch any up-to-date internet browser. To eradicate compatibility issues, we recommend choosing between internet explorer, chrome, safari, edge and firefox. 

✓ Now go to the browser’s address field. In it type 192.168.10.1. Press Enter key. Fill up required details like username and security key. It is “admin” and “password” respectively. 

✓ Finally, as you mark your entry into the main interface, select the identity of your existing wireless network. Fill up the password. Ensure its correctness. Lastly, complete the wavlink n300 wifi range extender setup by fulfilling all the instructions that pops up on your screen.

Note: For best working of your Wavlink N300 wireless network, it’s important to keep its firmware version to the latest. So before you close down the setup window, do not forget to visit the firmware upgrade section to look for any pending updates. If found, without taking any further time just begin the installation then and there.