Macard RE1800 Extender Setup

The Macard RE1800 extender is designed to improve wireless coverage. It will enhance the signals in areas where your router’s signal is weak or unstable. Using the RE1800 extender will eliminate dead zones. This device ensures smoother internet access for streaming, browsing, online classes, and work-from-home needs. The Macard RE1800 extender setup process is simple. You can complete the setup using either the WPS method or the web browser method. Before starting the setup using any method make sure your primary router is working properly. Also ensures that the device is placed within reasonable distance from the extender. Check out the steps specified underneath to install the device and complete the setup.

Installation 

To begin the Macard RE1800 extender setup you need to install the device properly. Here’s the installation process which you need to follow:

• First you have to search for a place to keep your Extender device. Keeping the extender close to the router ensures a smooth connection process.
• After that plug the extender into a wall socket near your main router. Avoid using extension cords or power strips during setup, as this may affect performance. After plugging it in, wait for the power LED to turn solid, indicating that the device is ready.
• Next, check the signal indicators on the extender. These lights help you understand whether the extender is placed correctly. 

WPS Setup Process

The WPS setup is the good guest process by following which you can complete the Macard RE1800 Extender Setup. You just need to check whether your router supports the WPS connection or not before moving forward with this method. If you are router supports the matter then you have to follow the below specified steps:

• After installing the device by following the above specified steps you have to locate the WPS button on your router device first and then on the extender device too. 
• Once you locate the button on both the devices you need to press the extender button first.
• You need to hold the button for about 10 seconds. 
• Within the next 2 minutes you have to press the button on your router device.
• Hold the button for 10 seconds and then release it. 
• Now monitor the device LED which will help you in verifying that the connection is done or not. 

The extender begins to communicate with the router automatically. Mumbai you have to keep an eye on the LED light which may blinks during the process. After a few minutes you will notice the LED turns solid which signifies that the connection has been established. In case the WPS connection fails then the LED will display red light on it. Once the connection is done you can relocate your extended device after unplugging it from the current position to boost your extender network. 

Web Setup Process

You can easily complete the Macard RE1800 Extender Setup using the web. Web setup method involved a few steps as specified below. You have to follow these steps to complete the configuration. 

• Using a smartphone, laptop, or computer, you need to commence the process. 
• Open the WiFi settings on your client device and connect to the extender’s default network. Default network details are usually mentioned on the device label.
• After connecting, open a web browser and enter the default setup address or IP address to open the setup page. 
• Now, create a login password and proceed to scan for available WiFi networks. 
• Select your main router’s network from the list and enter the WiFi password carefully.
• Further you need to change the network name and password of your device WiFi and do the other settings also.
• Once you confirm the settings, the extender will apply the changes and reboot. 
• You can then relocate the extender to a suitable location and enjoy improved WiFi coverage once the device boots up. 

Connect Us

Macard RE1800 Extender Setup process using web or WPS method is specified above which you can follow to complete the configuration. In case you face any trouble then connect our tech team for help. We can assist you with the setup process, troubleshoot the error you are facing and boost the signal coverage. What are you looking for? Call Now!