wifi wavlink
Search

How Do I Pair My Wavlink WiFi Extender To Router?

Jonewavewifi

Installation of an extender with router, helps to remove dead spots and increase WiFi speed at home or office. Wavlink WiFi range extender works bridge, getting WiFi signal from home router and rebroadcasting it in new area, where strength of WiFi signal is weak.

Wavlink extender setup with the host router is such a simple process. Information that you get on this page on Wavlink extender i.e., about their setup ways and troubleshoot issues. 

Pair Extender To Router By WPS

WPS is an uncomplicated method to configure extender. Consider lower steps:

  • Early closer to the host router, locate an extender. 
  • After that, place the Wavlink extender plug in the power outlet. 
  • Now, wait until power LED light blinks solid. 
  • Further, punch the Wavlink WiFi range extender WPS button. 
  • Within the next 2 minutes, press the router WPS button. 
  • To be successful, wait at least for 30 to 45 seconds. 
  • Router and extender unit solid WPS LED, defines extender setup is done.

Note:- When you are pairing the extender with the router by this method. Then verify first, the WPS button must be in your host router. If router does not support the WPS button then try another pairing method. 

Pair Extender To Router Manually

If you fail to connect the extender to the router by WPS button. Then try to configure the extender to the router manually. For this process, make sure you have a WIFi network device in working condition. 

  • First of all, with Wavlink extender default WiFi network connect WiFi device. 
  • Now, fill wifi.wavlink.com in the WiFi connected device chrome bar. 
  • Go to the extender setting page, by filling default information. 
  • From the WiFi network list, choose your home WiFi network. 
  • Establish a new SSIS and password and tap next to save it. 
  • Hence manual Wavlink extender setup with the router is done now. 

In case you fail to pair the extender with the router, then try the fixation tips below. 

Fixation Tips

There are numerous ways to fix the pairing problem of extender to router. See all the fixation tips one by one. 

Locate Extender Closer To Router

Locate the extender and router closer. Any wall, furniture or electronic device don’t be placed between them. Due to the electronic device, Wavlink extender unable to receive proper signal from the router. 

Download Firmware

Try to update firmware on time. Follow lower instructions to update software:

Go at Wavlink extender setup page, by typing wifi.wavlink.com or default IP address. After that, fill in login page details and go to the administration section. Now, from there select the software upgrade option. If any software file is pending then download it. Firmware latest file downloading process takes time up to 15 minutes to complete. 

Reset Factory Settings

Reset both router and extender to fix the issue permanently. 

Early, look for the reset button on both the extender and router unit. After finding it, grab the pin to push the reset button for 15 to 20 seconds. Further, wait till all extender and router LEDs are completely turned off. Hence, both units are completely reset. 

Note:- After resetting, do both Wavlink extender setup and existing router installation. . 

Conclusion

After this informative post, we hope you’ll be able to pair the extender with the router. Contact our Wavlink tech team, if you fail to pair the extender to the router. We will be really happy to help you in that case. For future updates related to this top, stay closer.