Wavlink consists of a wide variety when it comes to wifi signal repeaters. One of its popular creations is AX1800. It is a dual-band Wi-Fi range extender that operates on both 2.4 GHz and 5 GHz bands. With super-fast speeds of 1800Mbps, it is able to eliminate all sorts of connectivity problems, be it slow speeds or Wi-Fi dead zones. So if you also bought one for your home or office space, then this blog post can help you with the Wavlink AX1800 setup. The setup process is easy and is completely user-intuitive. We’ll list two methods, so you can consider one that is comparatively easier.
Wavlink AX1800 Setup Using WPS Key
Want to quickly eliminate the wifi dead zones and get seamless wifi connectivity all around the place? If yes, then the WPS Wavlink AX1800 setup method is totally apt for you.
- First, deploy the AX1800 closer to the router and then power it on.
- Wait for the power indicator to turn stable. Once it’s stable, press the WPS button and check if the WPS light is blinking or not. If not, then re-press the WPS button.
- Once the light starts blinking, go and push the router’s WPS button as well. Its indicator will also start pulsing.
- Now just hold on for a couple of seconds, and you’ll notice the indicators have turned stable. This means the Wavlink AX1800 setup is now complete.
- At last, all you have to do is unplug and reposition the extender. Keep it where your router’s signal drops to half, that is 50 percent.
Set up Using a Web Browser
Is your router not WPS-friendly? If yes, then the web browser-based Wavlink AX1800 setup method is for you. Moreover, if you wish to have more control over the AX1800’s network, then again using a web browser method is the right choice. The steps are as follows:
- Strategically deploy the extender within the range of the router. Now, power it on and wait for its power light to turn steady.
- Now grab your laptop or any well-working smart device. Go to the settings option and from there enable wifi. As you’ll enable it, a list of closer networks will pop up. From this list connect to Wavlink. The exact SSID is written on the product label.
- Moving forward, on the networked device, open the internet browser. For the Wavlink AX1800 setup, you can use any browser from Chrome, Edge, safari to internet explorer.
- Head to the address column. Into it type http://192.168.10.1 and press the Enter key. With this, the login setup pops up.
- Fill in the password and select the language. The password is “admin”.
- As you’ll tap on Login, the main panel will open up asking you about certain information. So fill in that information accurately. Once done, tap on Connect.
- Finally, relocate the device for complete connectivity.
Still have doubts regarding the Wavlink AX1800 setup? If yes, then our customer support team is available for your assistance 24/7. Feel free to call, mail, or chat.
