How to Solve Wavlink Connectivity Issues?

The nature of networking gadgets is very unpredictable. One moment they would be serving you to the best of their abilities and the very next moment they might stop working. Same is the case with Wavlink routers. Thus many users call us saying “Why won’t my Wavlink work”. So if you also have the similar question then this blog-post is definitely going to help you.

No matter whether the problem relates to sudden connection drop, no signals, dead zones, problem logging in, or any other wifi connectivity issue, all these problems will no longer frustrate you by the end of this post. As all these problems are very common and have quick solutions. So with no further delay, let’s get to the troubleshooting points one by one. 

✓ Start With Rebooting Your Devices 

Rebooting is the most underrated troubleshooting step when it comes to solving technical problems. A quick reboot refreshes the whole connection and also eradicates software glitches, if any. So, for rebooting, just consider these simple steps:

• Stop the electrical supply to your Wavlink router. 
• Detach the adapter from the socket. In addition to it, remove other wires as well. 
• Thereafter, wait for a minute.
• Now you can firmly re-attach all the cables as well as the router to its power socket. 

If rebooting didn’t help, don’t panic, just head to the next step. 

✓ Strategic Placement Of Router Is Crucial 

Yet another common reason behind the problem “why won’t my Wavlink work” is its incorrect placement. So if you want your router to provide you with seamless connectivity and wider coverage without any unnecessary interruptions, then follow these placement strategies.

• Always keep the networking device in an open space that offers ventilation. Ideally, you should place the router where you operate most of your gadgets so that the signal transmission is easier.
• Next up, try to plot the router away from certain objects like microwaves, refrigerators, cordless phones, aluminium doors, fish tanks, CCTV cameras, baby monitors, including Bluetooth devices and other gadgets of a similar kind. 
• Remember when you plot the router on some surface, like on a table, shelf, or any other high elevation, then you get better coverage and connectivity. 
• Never keep the router in the corner, in a box, or behind any furniture set or a thick concrete wall. 

✓ Update Firmware 

The culprit behind why my Wavlink won’t work is often pending updates because users overlook their importance. Remember, when manufacturers release updates, the major reasons behind the same are bug fixes, the introduction of new features, and better security. So if you are facing connectivity problems, it could be because of pending upgrades. Therefore, login into the management page. Head to the advanced section, follow it, choose firmware upgrade, and start with the installation of new updates. With this, the router will work to its abilities.

✓ Right Configuration 

The answer to why my Wavlink won’t work is: you might have done the configuration wrong. An incorrect configuration won’t let you use the device, no matter how hard you try. So here are the right configuration steps:

• Start by connecting the hardware. It means to link the modem to the Wavlink unit. Then link both of them to the power socket. Activate them by turning on the power button.
• After proper boot up, take the Ethernet cable. With this, establish a link between one of your smart devices and the Wavlink router. 
• Now open the internet browser. In the URL column, load http://192.168.10.1. 
• After that, push the Enter button. Now give in the passkey. It is “admin”. Select language. Tap on Login.
• Finally, adhere to the instructions that appear on the screen for the completion of setup. 

When nothing works, perform a factory reset or directly call our experts.