Greenwood 6 3000P Extender Setup
Product Features
The Greenwood 6 3000P range extender operates on dual-frequency bands. The combination of both bands together offers high wifi speeds of up to 3000Mbps. The extender inhibits IP67 waterproof enclosure and 15kV ESD protection in addition to 6KV protection from lightning. Thus no matter if it’s raining, snowing or thundering outside, the Greenwood 6 3000P extender setup will still work perfectly. Additionally the extender comes with fiberglass tube antennas that not only amps up the wireless coverage but can also handle strong winds and corrosion.
Moving further, the extender also supports both active and passive PoE (power over Ethernet). So you get to install the extender even at places where there is no power socket. With the availability of four 8dbi antennas and features like seamless roaming, it makes it worth spending every penny. Moreover you can switch between different modes. This particular extender from Wavlink can be used in AP mode, as a router, repeater and in both AP+Repeater mode.
After successful Greenwood 6 3000P extender setup you can easily pair more than 128 devices simultaneously. Coming to the security, the extender supports WPA2-PSK in addition to WPA2/WPA3 MIX security encryption.
Setup Guidance
The process for Greenwood 6 3000P extender setup is quite simple. You just have to follow the given steps precisely.
-
Assemble The Hardware
First take the RJ45 cable. Pass it through the waterproof connector. Now screw the waterproof seal with the connector bracket. Then pass the RJ45 cable through the bracket and then screw it as well into the cover. Now put the waterproof sealing on the connector bracket. Finally you can now link the wire to the WAN/LAN port of the extender.

-
Installation
After finishing the above written Greenwood 6 3000P extender setup step you can now install the device on your wall. For this take a 6mm drill and with the help of a positioning card make four holes of 2.5cm depth. Thereafter put the rubber plug and then the screws. Now hang the extender on these screws and turn on the extender.
-
Setup
For setup take your smart device. You can use any device like your laptop or smartphone. Go to settings. Enable wifi. Now connect to “WAVLINK-AX_XXXX”. Now on the paired gadget open internet browser. It must be up-to-date, compatible and to avoid unnecessary hassle also clear up its caches and cookies folder. Now head to the address column. In it fill up any of these two addresses:
- waplogin.link
- 192.168.30.1
As you fill up the above written information, click on Enter. Now fill in the security key. It is “admin”. With that click on Login. As you do so you’ll be prompted to choose your region, language and also to curate admin passkey. Do the needful. Now in the corner of the same page, you’ll find the option of mode switch. Tap on it. Select Repeater mode and then click on Next.
Finally the interface will scan for the network of your router. Once scanned, you need to tap on it. Then click on Next. If the name isn’t there in the list then you click on the rescan option. Lastly, as you choose the network, fill up its passkey and tap on Save. With this the Greenwood 6 3000P extender setup process is now complete.
Test
After completion, link your smart device to the newly extended network. Start streaming any high definition content and take a stroll in your outdoor area to check if the wireless coverage is proper or not. If the signals are not proper, then make sure the communication between your router and the Greenwood extender is proper. Try moving your router a little near to the extender. Next up, ensure the power supply is uncut and consistent. None of the wirings should be loose and make sure there are no electrical and metal items in close proximity to the extender. As such objects can mess up the entire setup.
If you still encounter any issue with the Greenwood 6 3000P extender setup then you can directly call our experts, send your queries through email or start live chat regarding the same.