Wavlink Extender Troubleshooting Guide (192.168.10.1 Not Loading?)

Wavlink extender devices are often used by people to get rid of wifi dead zone issues or weak signal problems in particular areas of the house or office. Wavlink extenders connect with the existing networking device and uplift their signal coverage further. To add up the wavlink extender into your existing network you can opt for two methods; web based and WPS. If you opt for a web way to configure or manage the network then you require access to the 192.168.10.1 IP. In case 192.168.10.1 Not Loading? then configuring the device becomes difficult through the web method. Also not even able to manage the existing configured extender. Hence, to perform setup of new devices and manage the extender network of existing one, you need to access IP. 

Troubleshooting the issue is very important. Easily reach to the 19.168.10.1 IP using the web once you perform the troubleshooting. This Wavlink Extender Troubleshooting Guide includes in depth information which will help you retrieve your wavlink extender’s network very easily. What are you waiting for now? Read up now by scrolling the page!

Cable Connection

Begin the troubleshooting with the checking of cable connections of the wavlink extender device. If the electric cable with which the device gets a supply of electricity to turn on is damaged then it will create issues as the extender will not receive proper electricity. On the contrary if your computer/ laptop is connected to the extender with ethernet and that ethernet is damaged then also you will not be able to access 192.168.10.1. To resolve the trouble you have to replace the damaged cable with a new one and then try to get access to the wavlink extender login page. 

Reboot The Device

Rebooting the wavlink extender might resolve the temporary issue that restricts 92.168.10.1 IP from Loading. To reboot your wavlink extender you should go through the given steps:

• First of all turn off the power of the power outlet or unplug the adapter from power. 
• Hang on for about 10-15 seconds and then you have to power up the device again. 
• Link the adapter with the power outlet and wait for booting to complete. 
• As the extender starts, try again to load the web interface and confirm the problem is resolved or not. 
• If the problem persists then try out the next troubleshoot.

Try Different Browser Or Device

In case booting the device doesn’t resolve the 192.168.10.1 Not Loading issue then you should try to access the IP in another browser. Might be your browser is creating trouble in accessing the IP. Before proceeding to access a new device you can try in the same browser again after clearing the cache files. Sometimes cache creates trouble in loading the IP. So, from your browser settings clear cache and then try again. If you didn’t get access yet then try accessing in a different web browser. 

Previously, if you were using google chrome then try to access it in Mozilla Firefox, safari or other similar browser. Ensure the browser is of the latest version. If you didn’t get access yet then try accessing on a different device. Might be the device you are using is restricting the access. This will definitely resolve the issue if not then you should try next troubleshooting. 

Assign a Static IP Address

Trying to access 192.168.10.1 IP but unable to access. By assigning a static IP address to your client device you can assess the web interface. Try assigning a static IP manually. Check the steps here:

• Go to Network and Sharing Center and then go to Change adapter settings
• Right-click your active connection and then choose Properties
• Click Internet Protocol Version 4 and then Properties
• Set the IP address manually:
  • IP: 192.168.10.5
  • Subnet Mask: 255.255.255.0
  • Default Gateway: 192.168.10.1
• Now try loading 192.168.10.1 in your browser.

Reset & Reconnect

Resetting the device back to factory settings can resolve several issues with your wavlink extender device. This will resolve connectivity issues, wrong password error, 192.168.10.1 Not Loading, configuration error and much more. To reset your device and reconnect it with the network you should move ahead with the given instructions:

• First of all use the reset button on the wavlink extender device to restore the factory settings. 
• Press the button with a paperclip help if needed. Hang on till the LED starts blinking faster. 
• Release the button and then let the device restore settings. 
• Monitor the device and when it finally boots up, follow the setup steps using WPS or web. 
• Web access can be possible using the IP and default details. 

Update Firmware Regularly

Old firmware could be the reason behind those annoying disconnections or slow speeds. This leads to trouble when trying to access the web interface of the wavlink extender. View the steps you should follow to update firmware:

• First of all enter the extender’s web interface. 
• Go to the administration section under settings and look for the firmware update option. 
• Choose up the manual update or online update option. 
• Update the firmware and then reboot the device. 
• Once your firmware gets updated, we hope you will not face any further issues. 

Conclusion

We trust the description on this page is helpful for you to get rid of the 192.168.10.1 Not Loading? or other issues. Wavlink Extender Troubleshooting of connectivity problems is very simple. Follow the guide and try to revive your device network by yourself. In case you got stuck in between then you can connect our support team. We have a team of technical people who can help in resolving the issue. They can guide you how to proceed further with the troubleshooting and get your network back as it was. Also they can help in setting up new extender devices into the network. Don’t hesitate, just call!